درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 1281-1300 of 2792
-
MIL-M-23573B
Abstract: This specification covers chelated-monoethanolamine for use in equipment for the removal of carbon dioxide from the air using a regenerative absorption process. Intended Use: Monoethanolamine chelating agent ...Subject(s) : Alkalinity , Ammonium oxalate , Calcium chloride , Chelating agent , Monoethanolamine , Nitrogen , -
MIL-I-24768/27
Abstract: This specification is approved for use by all departments and agencies of the Department of Defense.
The requirements for acquiring the insulation material described herein shall consist of this specification ... -
MIL-C-22249/49
Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MIL-PRF-24596B (1)
Abstract: This specification covers four classes and four grades of nonflaming, fire-resistant coatings which are suitable for use where volatile organic compound (VOC) content air pollution regulations apply for solvents in paints ...Subject(s) : Water-based , -
MIL-E-24652
Abstract: This specification covers the requirements for a 2-½ gallon fire extinguisher of the stored-pressure type. It is capable of generating a low expansion foam using AFFF concentrate and fresh water. Intended ... -
MIL-E-24142/18A
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements ... -
MIL-C-22249/37B
Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MIL-H-15021A
Abstract: This specification covers snap bolt, swivel-eye hooks and rings for application requiring rapid attachment and easy detachment for temporary fastenings. Intended Use: Type I regular snap bolt hooks are for ... -
MIL-S-24093A INT (1)
Abstract: This specification covers carbon and alloy steel forgings for general shipboard applciation.Intended Use: The carbon and alloy steel forgins covered by this specification are intended for general shipboard ... -
MIL-E-24142/2C
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements ...