درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 1561-1580 of 2792
-
DOD-STD-1399 -304
Abstract: The policies and procedures established by DOD-STD-1399 are mandatory. This section and the basic standard are to be viewed as an integral single document.
This section establishes interface requirements for the optimum ... -
MIL-V-24624
Abstract: This specification describes wafer and lug style butterfly valves for shipboard service. Intended Use: The valves are intended for use in naval shipboard piping systems. -
MIL-T-24270/3B
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements ... -
MIL-E-22200/3F
Abstract: This specification covers nickel, nickel alloy, and chromium-cobalt alloy covered electrodes for shielded metal-arc welding with direct current (dc) reverse polarity. Intended Use: Nickel, nickel alloy and ...Subject(s) : Alloy , Copper-nickel alloy , Core wire alloy identity , Electrodes , Steel , Weld metal , -
MIL-M-2082C
Abstract: This specification covers fresh water mechanical flowmeters (cold and hot water service) of the positive displacement type.
Flowmeters shall be of the following classes, as specified (see 6.2.1):...
-
MIL-C-24746
Abstract: This specification describes forced air unit coolers for use in food storage chill and freeze rooms on board Naval ships.
Unit coolers shall be of the following sizes and capacities (see 3.4 and 6.2): ...Subject(s) : Air unit cooler , Cooler , Refrigeration , Unit cooler , -
MIL-H-24592
Abstract: This specification covers tetrafluoroethylene (TFE) hose assemblies for low pressure, vacuum steam systems in marine piping systems. They may be used for other systems where the pressure, temperature, and vacuum conditions ... -
MIL-HDBK-2038
Abstract: This standard establishes the requirements for the implementation of SPS in the design and construction of military electronic systems.
Purpose. The purpose of this standard is to provide the acquisition ...Subject(s) : Airborne Power Supply Products , APSP , Modules , Standard Electronic , Power Supplies , SEM , SHARP , Shipboard Power Supply Products , SPS , SPSP , Standard Electronic Modules , Standard Hardware Acquisition and Reliability Program , -
MIL-H-24135/10A
Abstract: This specification covers synthetic rubber hoses, reinforced with a single or double layer of wire braid in sizes -4 through -48 for medium pressure fluid applications. Intended Use: Hose to this specification ...Subject(s) : Group IV , Group VIII , Petroleum , Sea water , -
MIL-C-24368/4A
Abstract: This specification is approved for use within the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
[A circled] The ... -
MIL-PRF-17331K
Abstract: This specification covers a single classification of steam turbine and gear lubricating oil, moderate service, for use in main and auxiliary turbines and gears, air compressors, and certain hydraulic equipment, as well as ...