Now showing items 1581-1600 of 2792

    • MIL-G-17489B 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1961
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers boiler air pressure gages suitable for measuring air pressure up to and including 200 inches of water.
      Air pressure gages shall be of the following types and classes as specified (see ...
    • MIL-M-28787/349 CANC NOTICE 2 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2013
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-PRF-32107/12 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2002
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-M-28787/60B CANC NOTICE 2 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2013
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-PRF-32187 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2005
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This performance specification covers hybrid gaskets designed for sealing ASME B16.5, Class 150, flat and raised face flanges in fuel and lube oil piping systems. Hybrid gaskets are fire resistant and are intended for ...
      Subject(s) : Fire Resistant , Flat Face Flange , Fuel Oil Piping , Gasket , Hybrid Gasket , Lube Oil Piping , Raised Face Flange , Shipboard Use ,
    • MIL-B-16008C VALID NOTICE 1 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1990
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-STD-1628 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1974
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This standard contains the necessary data for selecting or calculating continuous double fillet weld sizes that will provide the required joint efficiency and yet be economical for the application involved.
    • MIL-DTL-24231/28C 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2013
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-C-24356A (2) 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1988
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-S-24187/6A 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1991
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification sheet is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all departments and agencies of the Department of Defense.
      The requirements for acquiring ...
    • MIL-C-24174/3A 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1987
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: ∗ This specification is approved for use within the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
      ∗ The ...
    • MIL-PRF-6855/5A 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2009
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-DTL-24441/40B 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2009
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • QQ-B-728 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1961
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification -covers wrought manganese' bronze which may be used where superior strength and corrosion resistance is required such as valve stems, propeller-blade bolts, air pumps, condenser bolts, gears, bearings, ...
    • MIL-F-16377/71 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1982
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification sheet is approved for use by the Naval Sea Systems Command and is available for use by all Departments and Agencies of the Department of Defense.
      The complete requirements for acquisition of the ...
    • MIL-M-28787/322B CANC NOTICE 2 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2013
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-F-16377/59A (1) 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1996
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-S-24235/14C 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1992
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
      The requirements for acquiring ...
    • MIL-DTL-24552/4B VALID NOTICE 1 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2007
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-V-24332 (2) 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1974
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)