درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 1621-1640 of 2792
-
MIL-S-19676
Abstract: This specification covers sockets for holding various types of taper-shank cutting tools in machine spindles and turrets. -
MIL-S-24187/13
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all departments and agencies of the Department of Defense.
The requirements ... -
A-A-59682
Abstract: This commercial item description identifies the requirements of the inflation valve for 25-person life rafts. Intended Use: This valve is used in conjunction with a 5000 psi (nominal) air charged cylinder ... -
MIL-I-24092/10A
Abstract: This specification is approved for use by all departments and agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ... -
DOD-M-24672/11
Abstract: This specification is approved for use within the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
A-A-59184
Abstract: This commercial item description (CID) covers mechanically refrigerated, pressurized, carbonated beverage (soft drink) dispensers for Naval shipboard use. The dispensers are for use in self-service serving lines to mix, ... -
MIL-V-17501F
Abstract: This specification covers magazine and hangar deck sprinkler control type valves for shipboard service. Intended Use: The valves covered by this specification are intended for use in shipboard fire protection ...Subject(s) : Diaphragms , O-rings , Seat rings , Silver brazing union connections , Three-way control , four port , -
MIL-L-24560/4A
Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MIL-I-24768/23
Abstract: This specification is approved for use by all departments and agencies of the Department of Defense.
The requirements for acquiring the insulation material described herein shall consist of this specification ... -
MIL-G-3124D
Abstract: This specification covers salient pole and round rotor (cylindrical), continuous duty, 60 hertz (Hz), constant speed, single- and three-phase generators, up to 8000 kilowatts (kW).
This appendix covers information ...Subject(s) : Armature , Constant speed , Continuous duty , Exciter , Prime mover , Resistance temperature sensing element , Rotor , -
DOD-G-24650
Abstract: This specification covers greases for use in food processing equipment in applications where there may be incidental contact with food. Intended Use: Grease covered by this specification is intended for use ... -
MIL-DTL-32258
Abstract: This specification covers ring-type, self-locking, heavy hex, nickel-copper alloy nuts, with screw threads with a controlled root radius for use in general shipboard applications. Coarse pitch series and eight pitch series ...