درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 1601-1620 of 2792
-
MS17850
Abstract: This standard has been approved by the BUREAU OF SHIPS Department of the NAVY and is mandatory for use by that activity. All other military activities are required to employ this standard where suitable. -
MIL-F-16377/58B
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements for acquiring the fixtures ... -
QPL-23020-2
Abstract: This list has been prepared for use by or for the Government in the procurement of products covered by the subject specification and such listing of a product is not intended to and does not connote indorsement of the ... -
MIL-H-21367/8
Abstract: This specification is approved for use within the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MIL-V-18110F
Abstract: This specification covers steel gate valves in sizes 2-½ inches to 16 inches for steam, water and oil services on shipboard. Intended Use: Gate valves are intended for use in steam, water, and oil ...Subject(s) : Bonnet , Bosses , Flow coefficient , Valve seat , Water way , Yoke , -
ZZ-R-768B
Abstract: This specification covers uncured rubber compound or finished (cured) resilient components to be used in unbonded-spool and compression typed mountings, as specified.Intended Use: This specification describes ...Subject(s) : Elastomers , Synthetic , -
MIL-G-2857B
Abstract: This specification covers rectangular heat-treated quality clear glazing glass for bridge windows. This specification does not include bulletproof glass. Intended Use: The glass covered by this specification ...Subject(s) : Grooving , Impact resistance , Light transmission , Polariscopic examination , -
A-A-59473
Abstract: This commercial item description (CID) covers a fire-resistant, shrink-resistant, woven-fiber berth curtain and associated fittings for Naval shipboard use. -
MIL-PRF-32226
Abstract: This specification covers the performance requirements for flame detectors (see 6.8.5), which are components of an overall Advanced Fire and Smoke Sensor System (AFSSS) for use on naval ships. These flame detectors may be ...Subject(s) : Alarm signal , Flame Detector Zone Module , Signaling line circuit , Smoke detector , Switch Closure Zone Module , -
MIL-C-24707/4
Abstract: This specification covers Hadfield manganese steel castings for use in ship nonmagnetic or wear resistant applications.
Austenitic manganese steel shall be furnished in accordance with grade A of ASTM A 128 and in the ...Subject(s) : Bend test , Composition , Galvanizing , Nonmagnetic , Steel , -
MIL-F-16377/39A
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for procuring the light described herein shall consist of this document and the latest ... -
MIL-C-15730M
Abstract: This specification covers lubricating oil, hydraulic oil, and fresh water coolers for Naval shipboard applications for which standards of resistance to shock and standards of construction are higher than for usual commercial ...Subject(s) : Drums , Fins , Flanges , Foundry resistance , Gaskets , Heat exchanger , Shells , Tube sheets , Tubes , Vents ,