درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 2121-2140 of 2792
-
MIL-C-22249/27B
Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MIL-I-24092/8A
Abstract: This specification is approved for use by all departments and agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and the issue ... -
MIL-C-22249/7B
Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MIL-S-17000/3A
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements ... -
MIL-C-22249/14A
Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MIL-W-15000K
Abstract: This specification covers the composition and quality of chemicals used in testing shipboard boiler water and feedwater. Intended Use: The reagent chemicals covered by this specification are intended to be ...Subject(s) : Chloride indicator , Desiccants , Mercuric nitrate solution , Methyl purple indicator , Nitric acid reagent , Phenolphthalein , Reagents , Water-testing chemicals , -
MIL-STD-289A
Abstract: This document covers only visual defects for conventional rubber sheet material, from which gaskets, and similar items are cut. This standard is not applicable to cellular rubber, coated fabrics, cast plastisol, or latex films. -
MIL-B-18558B
Abstract: This specification covers disc lubricated journal bearing units for journals between 8 and 36 inches in diameter. These bearing units are used to support propulsion line shafts on Naval ships. Intended Use: ...Subject(s) : Bearings , lubricated radial support , Oil disc , Propulsion line shaft , Resistance temperature , Shock loading , -
MIL-C-17605C
Abstract: This specification covers one type of unimpregnated, activated charcoal for use in air filters in submarines. Intended Use: The charcoal covered by this specification is for use in filters in submarines for ... -
A-A-50632A
Abstract: This commercial item description covers continuous self-cleaning simplex strainers. Intended Use: The strainers specified are intended for installation on the discharge side of the pump in the fuel/lubricating ...Subject(s) : Cleaning , Continuous , Filtration , Fittings , Fuel , Lube oil , Motor , Screen , Valves , -
MIL-DTL-24784/11C
Abstract: This specification contains requirements for the preparation of a Ship Information Book (SIB) that is to be used as a system-level ready reference for the purpose of training and familiarization of ships systems. The SIB ...