درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 2141-2160 of 2792
-
MIL-T-20215C
Abstract: This specification covers silicon carbide refractory tile for use as baffles in naval boiler furnaces. Intended Use: The silicon carbide refractory tile is intended for use as baffles in naval boiler furnaces. -
MIL-PRF-32217A
Abstract: This specification covers requirements for scale prevention in sewage collection, holding and transfer (CHT) and vacuum CHT (VCHT) piping systems for use on naval surface ships, including the use of scale prevention ...Subject(s) : Chemical injection , -
A-A-59691
Abstract: Abstract. This document covers requirements for silicone compound which meets the requirements of Society of Automotive Engineers (SAE) specification SAE-AS8660 with additional requirements as listed here. -
MIL-L-1130E
Abstract: This specification covers hand carried, flood lighting, storage battery powered electric lanterns. Intended Use: This lantern is intended to provide temporary illumination during damage control operations.Subject(s) : Cell , battery , Drip-proof , Enamel , Zinc , -
MIL-C-24217/15
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements ... -
MIL-T-24649/17
Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the ... -
A-A-50619
Abstract: The General Services Administration has authorized the use of this Commercial Item Description. -
DOD-STD-1399 -072 PT 3A
Abstract: The procedures established by DOD-STD-1399 are mandatory. This section and the basic standard, that is, DOD-STD-1399, shall be viewed as an integral single document.
This section establishes interface requirements for ...Subject(s) : Air blast , shipboard topside , Blast mitigating measures , Blast overpressure parameters , Interface shipboard , Reflected overpressure , Thermal pulse , nuclear blast , -
MIL-C-24217/2
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements ... -
MIL-STD-1623E CHANGE 1
Abstract: This design criteria standard provides fire performance requirements and approved specifications for various categories of interior finish materials and furnishings for use on Naval surface ships and submarines. ...Subject(s) : Ceiling products , acoustical , Char , Combustion , Curtains , Deck coverings , Draperies , Fire resistance , Flame , Flame spread , Flashover , Furniture , Heat release , Ignition , Insulation , thermal , Sheathing , bulkhead , Sheathing , overhead , Smoke , -
DOD-R-23679F
Abstract: This specification covers reagents for use in checking the quality of water testing chemicals and equipments used in boiler powered ships.
Standard reagents shall be of the following classes, as specified (see ...Subject(s) : Chemicals , Chloride , Conductivity , Hardness , Methyl purple , pH , Reagents , Water test , -
MIL-E-22200/9B
Abstract: This specification covers low-hydrogen or low-hydrogen iron-powder type of covered electrodes, for the fabrication and repair welding of HY-130 steel for as-welded applications. Intended Use: This specification ...