Now showing items 2621-2640 of 2792

    • MMM-A-121 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1966
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers adhesives for bonding vulcanized synthetic rubber gaskets, matting, and similar items to steel. Intended Use: Adhesives conforming to this specification are intended for bonding ...
    • MIL-F-16377/1B 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1981
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification is approved for use by the Naval Sea Systems Command and is available for use by all Departments and Agencies of the Department of Defense.
      The complete requirements for acquiring the fixtures ...
    • MIL-I-22076B (1) 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1984
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • A-A-50610 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1993
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: The General Services Administration has authorized the use of this Commercial Item Description.
    • MIL-DTL-24643/24C 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2009
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-C-28754D SUPP 1 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1989
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-C-22249/26B 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1989
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
      The requirements for acquiring ...
    • MIL-M-28787/239A CANC NOTICE 2 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2013
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-L-24560/4A NOTICE 2 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2005
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-S-17000/1A 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1983
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification sheet is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
      The complete requirements ...
    • MIL-DTL-17587/1 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2007
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-C-22249/12A 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1989
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
      The requirements for acquiring ...
    • MIL-E-17341C 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1970
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers gas turbine engines for propulsion, generator, and auxiliary drive for marine service.
      Engines shall be either of the following types as specified (see 6.1).
          Type A - ...
    • MIL-M-24738 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1990
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification establishes the design, performance, and test requirements for the motor thermal protection systems to be used in 60-hertz (Hz) and 400-Hz motors.
      The motor protection system consists of multiple ...
      Subject(s) : Motor thermal protection system , Thermistor , Thermocouple ,
    • MS27826 REV A 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1975
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-DTL-17361/1B 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2006
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-M-28787/211A CANC NOTICE 2 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2013
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-C-28754/93 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1989
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
      The requirements for acquiring ...
    • MIL-DTL-16377/80 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2008
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
    • MIL-P-23917 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1963
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers requirements for the design and construction of an electrostatic precipitator for preventing the emanation of oil mist from breather vents of gear boxes and other such equipment.