درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 2601-2620 of 2792
-
MIL-PRF-32227
Abstract: This specification covers the performance requirements for Flame Detector Zone Modules (FDZM) (see 6.8.6), Switch Closure Zone Modules (SCZM) (see 6.8.16), and isolators (see 6.8.9) and their respective enclosures, which ...Subject(s) : Alarm signal , Heat sensor , Signaling line circuit , Smoke detector , Trouble signal , -
MIL-STD-2003-2A
Abstract: This standard covers standard installation methods for casualty power, shore power, electrical equipment, and switchboards.
Application. These installation methods are to be used by all installing activities. ...Subject(s) : Battery equipment , Casualty power , Shore power , Switchboard mounting , -
MIL-F-16377/36
Abstract: The complete requirements for procuring the lights described herein shall consist of this document and the latest issue of MIL-F-16377(SHIPS). -
MIL-I-3374A
Abstract: This specification covers insurance intended for use as cable insulation, coil wrappers, and for insulating bus bars, joints and terminals of electric wires and cables winding insulation and other electrical apparatus ... -
MIL-A-23054A
Abstract: This specification covers the requirements for fibrous glass acoustic absorptive board with a perforated fibrous glass cloth facing. Intended Use: The acoustic absorptive board covered by this specification ... -
MIL-F-16377/27B
Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MIL-F-16377/18A
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements for acquiring the fixtures ... -
MIL-C-2861E
Abstract: This specification establishes the requirements for high temperature insulation cement for thermal control of irregular surfaces and for piping operating at temperatures between 100 and 1800 degrees Fahrenheit (°F). ...Subject(s) : Consistency , Thermal conductivity , -
MIL-PRF-29504B VALID NOTICE 1
Abstract: This specification covers the general requirements for removable crimp and epoxy type fiber optic termini for use in connectors and other fiber optic components (see 6.1). Intended Use: The fiber optic ... -
MIL-S-24660
Abstract: This specification covers 180 degree full cone sprinkler heads. Sprinkler heads shall be for pendent or upright installation in overhead sprinkler systems. Intended Use: The sprinkler heads covered by this ... -
MIL-HDBK-263B
Abstract: This handbook provides guidance for developing, implementing and monitoring an ESD control program in accordance with the requirements of MIL-STD-1686. Information is provided in 6.1 that cross references the various ...Subject(s) : Electrostatic discharge sensitive (ESDS) , Electrostatic protection , ESD control program , Metal oxide semiconductors , Semiconductor devices , Static electricity , Triboelectric effect , -
MIL-I-24768/14
Abstract: This specification is approved for use by all departments and agencies of the Department of Defense.
The requirements for acquiring the insulation material described herein shall consist of this specification ...