درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 741-760 of 2792
-
MIL-H-21367/24
Abstract: This specification is approved for use within the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MIL-P-24583B
Abstract: This specification establishes the requirements for staple or continuous filament graphitic or carbon yarn packing. Packing is for steam valve service on naval ships. Intended Use: Type I and type II packings ...Subject(s) : Carbon assay , Center-corner-stuffer strands , Mass , PTFE coating , Reflux condenser , -
MIL-C-717F
Abstract: This specification covers castable refractory mix for use where temperatures up to 3,000 degrees Fahrenheit (°F) may be encountered. Intended Use: This castable mix will primarily be used in areas where ...Subject(s) : Heat resistant , Linear change , Preheat , Rupture , Shelf life , Spalling , -
A-A-59730 VALID NOTICE 1
Abstract: SCOPE. This Commercial Item Description (CID) covers the requirements for a tapered tube plug (TTP) which is used within a Blown Optical Fiber (BOF) tube to prevent movement of the BOF fibers or BOF bundles. Intended ... -
MIL-F-16377/24
Abstract: The complete requirements for procuring the fixtures described herein shall consist of this document and the latest issue of MIL-F-16377(SHIPS). -
MIL-B-24692A
Abstract: This specification covers one classification of a self-generating, type A-4 oxygen breathing apparatus for use by firefighting, damage control, and other personnel. Intended Use: The oxygen breathing apparatus ...Subject(s) : Firefighting equipment , Gas mask , Life support devices , Neoprene-coated fabric , Rescue equipment , Rubber compound , Self-extinguishing fabric , Skin tests , rubber irritation , Tubes , -
MIL-STD-2042-7
Abstract: This standard practice provides detailed methods for installing pierside connectivity fiber optic cable assemblies and interconnection hardware. Intended Use: The methods for installation of connectors and ...Subject(s) : Fiber optic cable assembly , Fiber optic interconnection hardware , Hermaphroditic connector , Safety , -
MIL-E-23765/1E
Abstract: This specification covers ordinary strength steel solid bare and alloyed cored welding electrodes and cut-length rods for use with the gas metal-arc (GMA), gas tungsten-arc (GTA), and submerged-arc welding (SAW) processes. ... -
MIL-M-17059A
Abstract: This specification covers 60 cycle, fractional horsepower (hp.), alternating-current, motors for shipboard use.
The motors shall be of the following services, as specified (see 6.1):
Service A - For ... -
MIL-P-15238D
Abstract: This specification covers the design and construction of a public address set consisting of an amplifier-battery cabinet, an electric megaphone and a repair parts kit. -
A-A-59188
Abstract: This commercial item description (CID) covers refrigerators for bulk milk containers, which also serve as counter-height stands for supporting bulk milk dispensers for Naval shipboard use. -
MIL-H-24653/6
Abstract: This specification sheet is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The complete requirements ... -
MIL-S-24235/3A
Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MIL-I-24768/5
Abstract: This specification is approved for use by all departments and agencies of the Department of Defense.
The requirements for acquiring the insulation material described herein shall consist of this specification ...