NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions

Now showing items 861-880 of 2792

    • MIL-H-24653/5 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1985
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification sheet is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
      The complete requirements ...

    • MIL-DTL-17361/13B 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2006
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)

    • MIL-I-24768/4 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1992
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification is approved for use by all departments and agencies of the Department of Defense.
      The requirements for acquiring the insulation material described herein shall consist of this specification ...

    • MIL-C-22249/40B 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1989
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
      The requirements for acquiring ...

    • DOD-STD-2182 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1985
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This Military Standard establishes uniform standards for repair and refurbishment of shafting not subject to sea water service.

    • MIL-DTL-24643/28F 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2009
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)

    • MIL-A-3316C 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1987
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers fire-resistant adhesives for securing cloth and tape to certain thermal insulations and for securing thermal insulations to metal surfaces.
      The adhesives shall be of the following classes and ...
      Subject(s) : Bonding , Fibrous glass cloth , Fibrous glass insulation ,

    • MIL-M-28787/236A CANC NOTICE 3 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2013
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)

    • MIL-I-24768/7 (1) 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1992
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)

    • MIL-S-17000N 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1983
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers the general design requirements, operating conditions, and tests for Naval shipboard switching equipment (see 6.1). Intended Use: Equipment covered in this specification is ...

    • MS17850 VALID NOTICE 2 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1993
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)

    • MIL-HDBK-2150A 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2008
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: The purpose of this handbook is to establish a uniform system for recording and identifying the space allocated in Navy ships and to provide an alphabetical listing of all approved ship compartment titles. The Space ...

    • MIL-T-24649/8 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1994
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification is approved for use by the Naval Sea Systems Command, Department of the Navy and is available for use by all Departments and Agencies of the Department of Defense.
      The requirements for acquiring the ...

    • MIL-H-22240F 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1988
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers lightweight, smooth bore, petroleum based fuels and water service discharge rubber hoses. Intended Use: Hose is intended for use in, but not limited to, refueling-at-sea. The maximum ...
      Subject(s) : Adhesion , Non-volatile extractable material , Ozone , resistance to , Phosphate plasticized , Tube stock ,

    • MIL-M-28787/208 CANC NOTICE 2 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2013
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)

    • MIL-PRF-2912G 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2004
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers the material for lining the battery compartments of submarines and other compartments aboard ships with a synthetic rubber compound which is resistant to battery acid and hydrocarbon oils (see ...
      Subject(s) : Battery compartment , Vulcanized ,

    • MIL-PRF-24623/4C VALID NOTICE 1 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2007
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: Intended Use: The splices and shock hardened splice tray are intended for use in all applications inside protective enclosures. The non-hardened splice tray is intended for use in protective enclosures that ...

    • MIL-PRF-16173E INT AMD 1 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;2006
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers solvent-dispersed corrosion preventive compounds that deposit thin, easily removable films after evaporation of solvent.Intended Use: The corrosion preventive compound covered by ...
      Subject(s) : Adhesion , low-temperature preservative , Miscibility , preservative , Nonvolatile preservative , Preservative , removal , Removable film preservative , Salt spray preventive , Shed storage , preservative , Sprayability , Sulfated residue , Weathering , accelerated ,

    • MIL-R-2728C 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1977
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers parabolic reflectors for searchlights.
      Reflectors shall be of the following sizes as specified (see 6.2.1). (These sizes are ratings based on serviceable reflector area, and are not ...

    • MIL-T-20219D 

      Type: standard
      Source: NAVY - SH - Naval Sea Systems Command (Ship Systems):;1986
      Organization : NAVY - SH - Naval Sea Systems Command (Ship Systems)
      Abstract: This specification covers seamless drawn brass tube corresponding to copper alloy UNS No. C26000 for shipboard voice and pneumatic service. Intended Use: Voice and pneumatic tubes are intended for use in all ...
      Subject(s) : Copper alloy tube , pneumatic application , Pneumatic tubes , dimensions and tolerances , Tube , brass , voice , Tube , pneumatic , Voice service shipboard tubes ,