درباره ما
API RP 11AR
Recommended Practice for Care and Use of Subsurface Pumps - Fourth Edition
Organization:
API - American Petroleum Institute
Year: 2008
Abstract: The intent of this recommended practice is to give information on the proper selection, operation and maintenance of subsurface pumps so the best economical life can be obtained.
The basic walking-beam sucker rod combination for producing fluids from the ground had its beginning in very early history. In more recent times, many advances in design and metallurgy have evolved. The method is so popular that today approximately 90 percent of all artificially lifted wells are produced by a sucker rod pump.
The downhole sucker rod pump is only one portion of the pumping system (see Figure 1). The other major components are the sucker rod string, the surface pumping unit and the prime mover. For proper pumping operation and long maintenance-free runs, all components of the system must be designed and sized properly, taking into account well depth, the amount and viscosity of fluids (oil, water or gas) to be produced, and abrasiveness and corrosiveness of fluids. A failure of any one of the pumping components will result in a shut down of the system, resulting in a costly repair, down-time and possible loss of production.
The basic walking-beam sucker rod combination for producing fluids from the ground had its beginning in very early history. In more recent times, many advances in design and metallurgy have evolved. The method is so popular that today approximately 90 percent of all artificially lifted wells are produced by a sucker rod pump.
The downhole sucker rod pump is only one portion of the pumping system (see Figure 1). The other major components are the sucker rod string, the surface pumping unit and the prime mover. For proper pumping operation and long maintenance-free runs, all components of the system must be designed and sized properly, taking into account well depth, the amount and viscosity of fluids (oil, water or gas) to be produced, and abrasiveness and corrosiveness of fluids. A failure of any one of the pumping components will result in a shut down of the system, resulting in a costly repair, down-time and possible loss of production.
Collections
:
Show full item record
| contributor author | API - American Petroleum Institute | |
| date accessioned | 2017-09-04T16:35:53Z | |
| date available | 2017-09-04T16:35:53Z | |
| date copyright | 06/01/2000 (R 2008) | |
| date issued | 2008 | |
| identifier other | VBEXFCAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/99335 | |
| description abstract | The intent of this recommended practice is to give information on the proper selection, operation and maintenance of subsurface pumps so the best economical life can be obtained. The basic walking-beam sucker rod combination for producing fluids from the ground had its beginning in very early history. In more recent times, many advances in design and metallurgy have evolved. The method is so popular that today approximately 90 percent of all artificially lifted wells are produced by a sucker rod pump. The downhole sucker rod pump is only one portion of the pumping system (see Figure 1). The other major components are the sucker rod string, the surface pumping unit and the prime mover. For proper pumping operation and long maintenance-free runs, all components of the system must be designed and sized properly, taking into account well depth, the amount and viscosity of fluids (oil, water or gas) to be produced, and abrasiveness and corrosiveness of fluids. A failure of any one of the pumping components will result in a shut down of the system, resulting in a costly repair, down-time and possible loss of production. | |
| language | English | |
| title | API RP 11AR | num |
| title | Recommended Practice for Care and Use of Subsurface Pumps - Fourth Edition | en |
| type | standard | |
| page | 60 | |
| status | Revised | |
| tree | API - American Petroleum Institute:;2008 | |
| contenttype | fulltext |