Search
Now showing items 11-20 of 1186
TIA TIA-455-134: FOTP-134 Measurement of Connector Ferrule Hole Inside Diamete
Abstract: Introduction
Intent
The intent of this procedure is to determine the inside diameter of the ferrule hole in an optical fiber connector ferrule.
Accuracy and precision ...
Intent
The intent of this procedure is to determine the inside diameter of the ferrule hole in an optical fiber connector ferrule.
Accuracy and precision ...
TIA TIA/EIA/IS-J-STD-781: GEO-Mobile Radio Interface Specification: GRM-2 (Series 1-6)
Abstract: This specification provides the abbreviations and acronyms to be used throughout the GMR-2 system.
All abbreviations are presented in the singular, but are equally applicable to the plural.
Annex A provides a GSM ...
All abbreviations are presented in the singular, but are equally applicable to the plural.
Annex A provides a GSM ...
TIA TIA-136-760-A: TDMA Third Generation Wireless - Charge-Rate Indication Teleservice (CIT) - ANSI Approved: 09/18/2013
Abstract: General
The Higher Layer Protocol Data Unit field in the R-Data Unit information element is used to carry the Charge Indication Teleservice (CIT) messages when the Higher Layer Protocol Identifier ...
The Higher Layer Protocol Data Unit field in the R-Data Unit information element is used to carry the Charge Indication Teleservice (CIT) messages when the Higher Layer Protocol Identifier ...
TIA TIA-1148: HRPD Support for Emergency Services
Abstract: This document covers the Access Network aspects that are essential for the provisioning of IMS emergency services. In particular HRPD [2], [6], [7] is supported. For cdma20001-1X access networks the traditional circuit ...
TIA TIA/EIA/IS-91-A: Base Station - Mobile Station Compatibility Specification for 800 MHz Cellular, Auxiliary, and Residential Services
Abstract: These technical requirements form a compatibility standard for a cellular radio telecommunications system. Their purpose is to ensure that a mobile station can obtain service in any cellular system manufactured according ...
TIA TIA-1191: Callback to an Emergency Call Origination Stage 1 Requirements
Abstract: This document specifies the access network requirements for Callback to an Emergency Call Origination (CECO). These requirements pertain to 1x Circuit Switched (1xCS) calls routed to a 1xCS access network and 1xCS calls ...
TIA TIA-136-320: TDMA- Third Generation Wireless-Radio Link Protocol- 2
Abstract: Purpose and Scope
This standard specifies a Radio Link Protocol (RLP2) that layer-3 functions may use to isochronously transport data across a TDMA radio interface. The protocol maintains bit-count ...
This standard specifies a Radio Link Protocol (RLP2) that layer-3 functions may use to isochronously transport data across a TDMA radio interface. The protocol maintains bit-count ...
TIA TIA-526-7: OFSTP-7 Measurement of Optical Power Loss of Installed Single-Mode Fiber Cable Plant
Abstract: This procedure can be used to measure the optical loss between any two passively-connected points, including end terminations, of a single-mode optical fiber cable piant. The optical fiber cable plant, as the term is used ...
TIA TSB-102.CBBE: Project 25 Recommended Compliance Assessment Tests - Conventional Operation
Abstract: This Bulletin identifies the tests in the TIA-102 series of technical documents that are appropriate for use in a compliance assessment testing environment in the area of Common Air Interface for Conventional operation. ...