Search
Now showing items 41-50 of 451
AWS C3.11M/C3.11: Specification for Torch Soldering - First Edition
Abstract: This specification presents the minimum process and quality requirements for the torch soldering of ceramics, precious metals, and refractory metals, as well as the alloys of copper (Cu), iron (Fe), nickel (Ni), aluminum ...
AWS B2.1-1-206: Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition, Primarily Pipe Applications
Abstract: The data to support this Standard Welding Procedure Specification (WPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ...
AWS B2.1-1-021: Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition Site License
Abstract: The data to support this Standard Welding Procedure Specification (WPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding ...
AWS D16.2M/D16.2: Guide for Components of Robotic and Automatic Arc Welding Installations
Abstract: This document applies to the recommended design, integration, installation, and use of industrial welding robotic and automatic systems. This document is intended for the gas metal arc welding (GMAW) and flux cored arc ...
AWS CM: Certification Manual for Welding Inspectors - Fourth Edition
Abstract: Preface
In 1976, the American Welding Society (AWS) introduced a much-needed certification program, specifically for those individuals who perform visual welding inspection. Shortly thereafter, the AWS Qualification and Certification Committee initiated the development of a publication that could serve as a valid reference for ...
In 1976, the American Welding Society (AWS) introduced a much-needed certification program, specifically for those individuals who perform visual welding inspection. Shortly thereafter, the AWS Qualification and Certification Committee initiated the development of a publication that could serve as a valid reference for ...
AWS B5.1: Specification for the Qualification of Welding Inspectors - 2nd Edition
Abstract: Requirements. This standard establishes the requirements for qualification and defines the body of knowledge applicable to welding inspection personnel.
Levels. There are three ...
Levels. There are three ...
AWS C4.2/C4.2M: Recommended Practices for Safe Oxyfuel Gas Cutting Torch Operation - Second Edition
Abstract: This standard describes the equipment, procedures and safe practices for the oxyfuel cutting of steel. It is for the operators of both hand and machine torches and is recommended for management personnel associated with the oxyfuel cutting process.
Oxyfuel gas cutting is a process whereby a metal (usually an iron base alloy) is heated to its ki...
Oxyfuel gas cutting is a process whereby a metal (usually an iron base alloy) is heated to its ki...
AWS B2.1-5A-222: Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), ER90S-B3, 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 3/4 in. Thick, PWHT Condition, Primarily Pipe Applications Site License - 1st Edition
Abstract: The data to support this Standard Welding Procedure Specification (SWPS) were derived from the above-listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding Research ...