Search
Now showing items 81-90 of 2439
AASHTO DIVISION I 11.5: Bridge Railing
Abstract: GENERAL: The purpose of this section is to provide a location for indexing aluminum design, material fabrication, and constmction specifications.
AASHTO T 307: Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials
Abstract: This method covers procedures for preparing and testing untreated subgrade soils and untreated base/subbase materials for determination of resilient modulus (Mr) under conditions representing a simulation of the physical conditions and stress states of materials beneath flexible pavements subjected to moving wheel loads.
The methods described a...
The methods described a...
AASHTO T 134: Standard Method of Test for Moisture-Density Relations of Soil-Cement Mixtures
Abstract: These methods of test are intended for determining the relation between moisture content and density of soil-cement mixtures when compacted before cement hydration as prescribed.
A 944-cm3 (1/30-ft3) mold and a 2.5-kg (5.5-lb) rammer dropped from a height of 305 mm (12 in.) are used and two methods, depending on soil grada...
A 944-cm3 (1/30-ft3) mold and a 2.5-kg (5.5-lb) rammer dropped from a height of 305 mm (12 in.) are used and two methods, depending on soil grada...
AASHTO TP 89: Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Teste
Abstract: The direct adhesion test is used to determine the adhesion strength of hot-poured crack sealant at the application temperatures.
The adhesion test is a test of fracture. The object of the test is to apply tensile forces to the interface between sealant and aluminum end pieces. Sealant is confined between two halfcylindrical aluminum end pieces....
The adhesion test is a test of fracture. The object of the test is to apply tensile forces to the interface between sealant and aluminum end pieces. Sealant is confined between two halfcylindrical aluminum end pieces....
AASHTO TP 102: Standard Method of Test for Evaluation of Asphalt Release Agents
Abstract: This method covers the laboratory performance evaluation of asphalt release agents. These release agents are used for coating tools and truck beds to prevent asphalt binder or hot mix asphalt (HMA) from adhering. The release agents should perform this function without causing degradation (stripping) of the hot mix asphalt.
This standard may inv...
This standard may inv...
AASHTO TP 84: Standard Method of Test for Evaluation of Adhesive Anchors in Concrete under Sustained Loading Conditions
Abstract: This test method applies to structures used in AASHTO applications and is applicable to adhesive anchor systems with steel anchors in predrilled holes in concrete.
This test method determines the time to failure ...
This test method determines the time to failure ...