Search
Now showing items 21-30 of 38
A-A-59203: PADDING MATERIAL, RESILIENT
Abstract: This CID covers the general requirements for two types of padding materials used in packaging ammunition. This material is used to fill gaps, adjust fit, and prevent motion of ammunition inside watertight containers.
MIL-DTL-21567B: COMPOUND, SILICONE, SOFT FILM
Abstract: This specification covers one grade of silicone compound with a corrosion inhibitor for application to unpainted threaded or nonthreaded mating surfaces of ferrous components between -65 degrees Fahrenheit (ºF) (-53.89 ...
MIL-P-71093: POWDER, IGNITION, GASLESS, F-33B
Abstract: This specification covers the requirements, examinations and tests for composition F-33B for the procurement of gasless, ignition powder (see 6.1). Intended Use: The gasless ignition powder is used ...
MIL-PRF-11090J: CLEANING COMPOUND, DEGREASING AND DEPRESERVING SOLVENT
Abstract: This specification covers one class of biodegradable degreasing and depreserving cleaning compound, suitable for use in removing oils, greases, asphalt, tars, and rust preventive compounds, other than a wax type, from ...
MIL-C-71134: CARTRIDGE, HE, 120MM, M933 W/FUZE M745 LOADING, ASSEMBLING AND PACKING
Abstract: This specification establishes the requirements and quality provisions for loading, assembling and packing for one type of mortar cartridge designated as Cartridge, HE, 120MM, M933 (see 6.1). Intended ...
MIL-C-498E: CLOTH, PARACHUTE, SYNTHETIC-FIBER (FOR AMMUNITION PARACHUTES)
Abstract: This document covers three types of nylon cloth, for the fabrication of ammunition and flare parachutes.
The cloth shall be of the following types (see 6.2):
The cloth shall be of the following types (see 6.2):
Type D - Nylon (0.88 oz per sq yd) ...
MIL-C-70472: CONTAINER AND CUSHION ASSEMBLY, AMMUNITION, METAL FOR CARTRIDGE, 120MM, TANK AMMUNITION
Abstract: This specification covers the requirements, quality assurance provisions and packaging for one type of metal container and cushion assembly used for 120MM tank ammunition. Intended Use: This container assembly ...
MIL-I-8670B: FIXED GUNS AND ASSOCIATED EQUIPMENT IN NAVAL AIRCRAFT, INSTALLATION OF
Abstract: This specification establishes the minimum requirements for the installation of all types of fixed guns and associated equipment including ammunition feed and ejection systems in naval aircraft. Installation details such ...
MIL-DTL-85405A: TRAILER, MUNITIONS, MHU-185/M
Abstract: This specification establishes the requirements for the procurement of a munitions trailer designated as MHU-185/M. Intended Use: The MHU-185/M Munitions Trailer is intended for use at Navy shorebase stations ...
MIL-C-71133: CARTRIDGE, IGNITION, M985 LOADING, ASSEMBLING AND PACKING
Abstract: This specification covers requirements and quality assurance provisions for the loading, assembling and packing for the Cartridge, Ignition M985 for use on the Cartridge, 81MM; Practice, Short Range, M880. Intended ...