درباره ما
ASCE - American Society of Civil Engineers: Recent submissions
Now showing items 101-120 of 168
-
ASCE 36-15
Abstract: This standard guideline covers planning, design, pipe materials, and construction of microtunneling. The term microtunneling is defined as a trenchless construction method for installing pipelines. The North ... -
ASCE MOP 73
Abstract: INTRODUCTION
The purpose of this Guide is to provide project owners, design professionals, and constructors with information and recommendations on opportunities to enhance the quality of ... -
ASCE 2-06
Abstract: This method covers the measurement of the Oxygen Transfer Rate (OTR) as a mass of oxygen per unit time dissolved in a volume of water by an oxygen transfer system operating under given gas rate and power conditions. Methods ... -
ASCE MOP 129
Abstract: PURPOSE AND SCOPE
The purpose of this manual is to provide general guidance to determine forces acting upon piers, wharves, and other fixed structures such as berthing and mooring dolphins due to berthed ... -
ASCE 61-14
Abstract: Scope and Limitations This standard addresses the seismic design of new piers and wharves supported on concrete or steel piles.
This standard does not address the following:- Structures ...
-
ASCE 7-10 SNOW LOADS
Abstract: Preface
This guide provides practicing structural engineers with a detailed description of the snow load provisions of ASCE/SEI Standard 7-10, Minimum Design Loads for Buildings and Other ... -
ASCE 20-96
Abstract: The provisions of this Standard establish guidelines for the design and construction of pile foundations. Many of the design considerations contained herein require a working knowledge of soil mechanics and foundation ... -
ASCE MOP 126
Abstract: INTRODUCTION
The architectural appeal of glass comes from its most obvious properties— light refl ectance and transmittance. In daylight, glass refl ects its surroundings. On a high-rise tower ... -
ASCE 21.4-08
Abstract: This standard has been divided into four parts to expedite the approval and release process as well as to facilitate ease of use. This document constitutes Part 4 of the standard.
Parts 1, 2, and 3 cover a minimum set ... -
ASCE 50-08/51-08
Abstract: This standard guideline outlines a procedure to optimize the fitting and goodness-of-fit testing of a probability density function (pdf) to a sample of saturated hydraulic conductivity (K) measurements. The procedure ... -
ASCE MOP 124
Abstract: This manual will focus on the "training structures" component of navigation channel design in mainly open-river channels; however, many of the types of structures presented can and have been used in lock and dam systems. ... -
ASCE 7-10
Abstract: This standard provides minimum load requirements for the design of buildings and other structures that are subject to building code requirements. Loads and appropriate load combinations, which have been developed to be ... -
ASCE 37-02
Abstract: This standard addresses partially completed structures, as well as temporary structures used during construction. The loads specified herein are suitable for use either with strength design (such as USD and LRFD) or with ... -
ASCE 11-99
Abstract: The intent of this Standard is to provide guidelines and methodology for assessing the structural condition of existing buildings constructed of combinations of materials including concrete, metals, masonry, and wood. This ... -
ASCE 4-98
Abstract: Types of Structures Covered by This Standard:
This standard is intended for use in the seismic analysis of all safety-related structures of nuclear facilities including, but not limited to, above and ...