SAE AMS6370N
Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) - UNS G41300
Organization:
SAE - SAE International
Year: 2011
Abstract: Form
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.
Application
These products have been used typically for parts, 0.50 inch (12.7 mm) and under in section thickness at time of heat treatment, requiring a through-hardened steel capable of developing hardness as high as 35 HRC when hardened and tempered, and also parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications.
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.
Application
These products have been used typically for parts, 0.50 inch (12.7 mm) and under in section thickness at time of heat treatment, requiring a through-hardened steel capable of developing hardness as high as 35 HRC when hardened and tempered, and also parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications.
Collections
:
Show full item record
contributor author | SAE - SAE International | |
date accessioned | 2017-09-04T16:46:48Z | |
date available | 2017-09-04T16:46:48Z | |
date copyright | 05/01/2011 | |
date issued | 2011 | |
identifier other | BTLTKEAAAAAAAAAA.pdf | |
identifier uri | http://yse.yabesh.ir/std/handle/yse/110112 | |
description abstract | Form This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings. Application These products have been used typically for parts, 0.50 inch (12.7 mm) and under in section thickness at time of heat treatment, requiring a through-hardened steel capable of developing hardness as high as 35 HRC when hardened and tempered, and also parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications. | |
language | English | |
title | SAE AMS6370N | num |
title | Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) - UNS G41300 | en |
type | standard | |
page | 7 | |
status | Active | |
tree | SAE - SAE International:;2011 | |
contenttype | fulltext |