ASTM E2517
Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/ M1078, 2 1/2 Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 2 1/2 Ton LMTV Trailer)
Organization:
ASTM - ASTM International
Year: 2011
Abstract: This specification covers the general requirements for the Type III Cargo Bed Cover (CBC). The Type III CBC is a removable general purpose rigid wall enclosure that is mounted on any of the following model 2.5 ton cargo trucks (1) the M35A2 Lightweight Medium Tactical Vehicle (LMTV) and (2) the M1078 LMTV . It can also be mounted on the M1082 LMTV Trailer. The CBC provides environmental protection and security for mission equipment and items of general transport.
The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
The following safety hazards caveat pertains only to the test required portion, Section 4, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.Intended Use: The Type III Cargo Bed Cover is an alternatives for the current bow and canvas covers and replacements for the various locally fabricated non-standard covers on the family of 2½-ton vehicles. The CBCs will provide environmental protection and security to the cargo area without compromising the road, sea, or air mobility requirements of the vehicle or trailer on which they are mounted. The CBCs covered by this document are not intended to be used as a stand alone item dismounted from their carrier
The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
The following safety hazards caveat pertains only to the test required portion, Section 4, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.Intended Use: The Type III Cargo Bed Cover is an alternatives for the current bow and canvas covers and replacements for the various locally fabricated non-standard covers on the family of 2½-ton vehicles. The CBCs will provide environmental protection and security to the cargo area without compromising the road, sea, or air mobility requirements of the vehicle or trailer on which they are mounted. The CBCs covered by this document are not intended to be used as a stand alone item dismounted from their carrier
Subject: Cargo Bed
Collections
:
Show full item record
contributor author | ASTM - ASTM International | |
date accessioned | 2017-09-04T16:54:40Z | |
date available | 2017-09-04T16:54:40Z | |
date copyright | 09/01/2011 | |
date issued | 2011 | |
identifier other | WZDSUEAAAAAAAAAA.pdf | |
identifier uri | http://yse.yabesh.ir/std/handle/yse/118115 | |
description abstract | This specification covers the general requirements for the Type III Cargo Bed Cover (CBC). The Type III CBC is a removable general purpose rigid wall enclosure that is mounted on any of the following model 2.5 ton cargo trucks (1) the M35A2 Lightweight Medium Tactical Vehicle (LMTV) and (2) the M1078 LMTV . It can also be mounted on the M1082 LMTV Trailer. The CBC provides environmental protection and security for mission equipment and items of general transport. The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. The following safety hazards caveat pertains only to the test required portion, Section 4, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.Intended Use: The Type III Cargo Bed Cover is an alternatives for the current bow and canvas covers and replacements for the various locally fabricated non-standard covers on the family of 2½-ton vehicles. The CBCs will provide environmental protection and security to the cargo area without compromising the road, sea, or air mobility requirements of the vehicle or trailer on which they are mounted. The CBCs covered by this document are not intended to be used as a stand alone item dismounted from their carrier | |
language | English | |
title | ASTM E2517 | num |
title | Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/ M1078, 2 1/2 Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 2 1/2 Ton LMTV Trailer) | en |
type | standard | |
page | 12 | |
status | Active | |
tree | ASTM - ASTM International:;2011 | |
contenttype | fulltext | |
subject keywords | Cargo Bed | |
subject keywords | Cover | |
subject keywords | M35A2 | |
subject keywords | 21⁄2 | |
subject keywords | Shelter | |
subject keywords | Ton Cargo Truck M1078 | |
subject keywords | 21⁄2 | |
subject keywords | Ton Lightweight Medium Tactical Vehicle (LMTV) M1082 | |
subject keywords | 21⁄2 | |
subject keywords | Ton LMTV Trailer |