درباره ما
Browsing EIA - Electronic Industries Alliance by Title
Now showing items 1-20 of 27
-
EIA CB6-A
Abstract: This document has been compiled in response to a generally expressed desire on the part of both users and manufacturers for a guide to the use of quartz crystal units for frequency control so that they may be used to their ... -
EIA EIA-186-14E
Abstract: PURPOSE
This test is intended to determine the effectiveness of panel seals on electronic components which are intended for mounting through holes in panels or enclosures. The panel seals are exposed to water under ... -
EIA EIA-364-63
Abstract: This test procedure establishes a test method to determine whether accessory thread strength and portion of the connector that accepts cable clamps and "J" adaptors shall be capable of withstanding torque requirements ... -
EIA EIA-468-C
Abstract: INTRODUCTION AND SCOPE
This standard was formulated to provide dimensions and tolerances necessary to lead tape components in the radial format (unidirectional leads) such that they may be automatically ... -
EIA EIA-477-A
Abstract: This document relates to crystalline quartz produced by hydrothermal growth intended to be used as raw material for piezoelectric crystal devices. -
EIA EIA-512
Abstract: Methods are described which permit determination of fhe values of the equivalent electrical parameters of piezoelectric quartz crystal units, utilizing automated measuring equipment. The methods described make use of ... -
EIA EIA-512-1
Abstract: This guide is intended to supplement EU-512, "Standard Methods of Measurement of Equivalent Electrical Parameters of Quartz Crystal Units, 1 kHz to 1 gHz." Frequent mention of the standard is made, and having the standard ... -
EIA EIA-541
Abstract: This standard applies to several different categories of electrostatic protective packaging materials. These packaging materials may possess certain electrostatic properties such as to prevent triboelectric charging ... -
EIA EIA-699
Abstract: This document provides nomenclature, methods, and criteria for characterizing acceptable quartz resonator blanks. Its major objective is to aid in the evaluation of the crystal blank through visual inspection of quartz ... -
EIA EIA-960-A
Abstract: This standard covers requirements for Assembly Component Trays –ACTs used during automated assembly processes. The standard size is covered which works with tray slots handling an envelope of 298.45mm (11.75inches) ... -
EIA EIA/ECA-704-A
Abstract: This Standard provides requirements for packaging components for automatic handling using mechanically-interlocking cover tape and carrier tape. -
EIA EIA/ECA-747-A
Abstract: This Standard covers requirements for 8mm, 12mm, 16mm and 24mm taping of surface mount components generally less than 1.0mm thick and requiring high precision taping for automatic handling of devices such as singulated ... -
EIA RS-186-10E
Abstract: PURPOSE
This test is performed to determine the effect of normal soldering operations on component parts. Excessive changes in electrical characteristics or mechanical damage to a component part are ... -
EIA RS-186-11E
Abstract: PURPOSE
This test is conducted for the purpose of determining the resistance of a component part to exposures at ! extremes of high and low temperatures in air, and to the shock of alternate exposures ... -
EIA RS-186-12E
Abstract: PURPOSE
This test is performed to determine the effect of storing or operating component parts at elevated temperatures for various time periods. Different degrees of severity as prescribed by temperature ... -
EIA RS-186-13E
Abstract: PURPOSE
This test is to measure the resistance offered by the insulating members of a component part to an impressed direct voltage tending to produce a leakage of current through or on the surface of ... -
EIA RS-186-1E
Abstract: PURPOSE
This test is intended to evaluate the effect of absorption and diffusion of moisture and moisture vapor on component parts. The test in an artificial environmental test, accelerated to shorten ... -
EIA RS-186-2E
Abstract: PURPOSE
This test is intended to evaluate in an accelerated manner, the resistance of component parts to deterioration resulting from high humidity and heat conditions typical of tropical environments. ... -
EIA RS-186-3E
Abstract: PURPOSE
This test is intended to evaluate the effect of absorption and diffusion of moisture and moisture vapor on component parts. The test is an artificial environmental test and is severely accelerated ... -
EIA RS-186-4E
Abstract: PURPOSE
This dielectric test is performed for the purpose of determining the ability of component parts to withstand a potential at sea level or at a specified altitude. The potential used is normally ...