AIAA S-115
Low Earth Orbit Spacecraft Charging Design Standard Requirement and Associated Handbook
Year: 2013
Abstract: This document and information handbook presents an overview of the current understanding of the various plasma interactions that can result when a high-voltage system is operated in the Earth's ionosphere. This document is also applicable to satellites during the lower latitude portion of polar orbits and to GEO satellites during the initial low altitude portion of their geostationary transfer orbit.
It references common design practices that have exacerbated plasma interactions in the past, and recommends standard requirements and practices to eliminate or mitigate such reactions.
Purpose
The purpose of this standard is to provide the requirements for a design standard for high-voltage space power systems (>55 V) that operate in the plasma environment associated with LEO (altitude between 200 km and 1000 km and latitude between -50 degrees and +50 degrees). Such power systems, particularly solar arrays, are the proximate cause of spacecraft charging in LEO. These systems can interact with this environment in a number of ways that are potentially destructive to themselves and to the platform or vehicle that has deployed them.
High-voltage systems are used in space for two reasons. The first is to save launch weight. High-voltage systems are often used as a means to reduce mass and increase efficiencies by reducing power line I2R losses. High-voltage systems are also used in space because some spacecraft functions require high voltages. For example, electric propulsion uses voltages from about 300 V (Hall thrusters) to about 1000 V (ion thrusters). For low-voltage power systems, conversion of substantial power to high voltages is required for these spacecraft functions to operate. The weight of the power conversion systems, power management and distribution (PMAD), can be a substantial fraction of the total power system weight in these cases. It is more efficient, and can save weight, if the high-voltage functions can be directly powered from a high-voltage solar array, for instance. If the high-voltage function is electric propulsion, then we call such a system a direct-drive electric propulsion system.
These two reasons and others are causing spacecraft designers and manufacturers to use high voltages more and more. However, doing so entails risk; in particular, spacecraft charging in LEO, in contrast to that in GEO, is caused by exposed high voltages and can lead to arcing, power drains, power disruptions, and loss of spacecraft coatings. Thus, system designers need a standard to show them how to mitigate the spacecraft-charging effects of using high voltages in LEO. In addition to system designers, this document should be useful to project managers, solar array designers, system engineers, etc.
This document is intended to provide requirements and associated best practices for design applications and can be used as a requirements-specification instrument.
It references common design practices that have exacerbated plasma interactions in the past, and recommends standard requirements and practices to eliminate or mitigate such reactions.
Purpose
The purpose of this standard is to provide the requirements for a design standard for high-voltage space power systems (>55 V) that operate in the plasma environment associated with LEO (altitude between 200 km and 1000 km and latitude between -50 degrees and +50 degrees). Such power systems, particularly solar arrays, are the proximate cause of spacecraft charging in LEO. These systems can interact with this environment in a number of ways that are potentially destructive to themselves and to the platform or vehicle that has deployed them.
High-voltage systems are used in space for two reasons. The first is to save launch weight. High-voltage systems are often used as a means to reduce mass and increase efficiencies by reducing power line I2R losses. High-voltage systems are also used in space because some spacecraft functions require high voltages. For example, electric propulsion uses voltages from about 300 V (Hall thrusters) to about 1000 V (ion thrusters). For low-voltage power systems, conversion of substantial power to high voltages is required for these spacecraft functions to operate. The weight of the power conversion systems, power management and distribution (PMAD), can be a substantial fraction of the total power system weight in these cases. It is more efficient, and can save weight, if the high-voltage functions can be directly powered from a high-voltage solar array, for instance. If the high-voltage function is electric propulsion, then we call such a system a direct-drive electric propulsion system.
These two reasons and others are causing spacecraft designers and manufacturers to use high voltages more and more. However, doing so entails risk; in particular, spacecraft charging in LEO, in contrast to that in GEO, is caused by exposed high voltages and can lead to arcing, power drains, power disruptions, and loss of spacecraft coatings. Thus, system designers need a standard to show them how to mitigate the spacecraft-charging effects of using high voltages in LEO. In addition to system designers, this document should be useful to project managers, solar array designers, system engineers, etc.
This document is intended to provide requirements and associated best practices for design applications and can be used as a requirements-specification instrument.
Show full item record
contributor author | AIAA - American Institute of Aeronautics and Astronautics | |
date accessioned | 2017-09-04T17:19:01Z | |
date available | 2017-09-04T17:19:01Z | |
date copyright | 2013.01.01 | |
date issued | 2013 | |
identifier other | ZMIJGFAAAAAAAAAA.pdf | |
identifier uri | http://yse.yabesh.ir/std/handle/yse/142289 | |
description abstract | This document and information handbook presents an overview of the current understanding of the various plasma interactions that can result when a high-voltage system is operated in the Earth's ionosphere. This document is also applicable to satellites during the lower latitude portion of polar orbits and to GEO satellites during the initial low altitude portion of their geostationary transfer orbit. It references common design practices that have exacerbated plasma interactions in the past, and recommends standard requirements and practices to eliminate or mitigate such reactions. Purpose The purpose of this standard is to provide the requirements for a design standard for high-voltage space power systems (>55 V) that operate in the plasma environment associated with LEO (altitude between 200 km and 1000 km and latitude between -50 degrees and +50 degrees). Such power systems, particularly solar arrays, are the proximate cause of spacecraft charging in LEO. These systems can interact with this environment in a number of ways that are potentially destructive to themselves and to the platform or vehicle that has deployed them. High-voltage systems are used in space for two reasons. The first is to save launch weight. High-voltage systems are often used as a means to reduce mass and increase efficiencies by reducing power line I2R losses. High-voltage systems are also used in space because some spacecraft functions require high voltages. For example, electric propulsion uses voltages from about 300 V (Hall thrusters) to about 1000 V (ion thrusters). For low-voltage power systems, conversion of substantial power to high voltages is required for these spacecraft functions to operate. The weight of the power conversion systems, power management and distribution (PMAD), can be a substantial fraction of the total power system weight in these cases. It is more efficient, and can save weight, if the high-voltage functions can be directly powered from a high-voltage solar array, for instance. If the high-voltage function is electric propulsion, then we call such a system a direct-drive electric propulsion system. These two reasons and others are causing spacecraft designers and manufacturers to use high voltages more and more. However, doing so entails risk; in particular, spacecraft charging in LEO, in contrast to that in GEO, is caused by exposed high voltages and can lead to arcing, power drains, power disruptions, and loss of spacecraft coatings. Thus, system designers need a standard to show them how to mitigate the spacecraft-charging effects of using high voltages in LEO. In addition to system designers, this document should be useful to project managers, solar array designers, system engineers, etc. This document is intended to provide requirements and associated best practices for design applications and can be used as a requirements-specification instrument. | |
language | English | |
title | AIAA S-115 | num |
title | Low Earth Orbit Spacecraft Charging Design Standard Requirement and Associated Handbook | en |
type | standard | |
page | 69 | |
status | Active | |
tree | AIAA - American Institute of Aeronautics and Astronautics:;2013 | |
contenttype | fulltext |