MIL-L-16355E (1)

LEAD STYPHNATE, BASIC

contributor author	ARMY - AR - US Army Research Devlp & Engr Command, Armament Research Devlp & Engr Center
date accessioned	2017-09-04T17:20:27Z
date available	2017-09-04T17:20:27Z
date copyright	05/04/2007
date issued	2007
identifier other	ZQCRACAAAAAAAAAA.pdf
identifier uri	http://yse.yabesh.ir/std/handle/yse/143617
description abstract	This specification covers the requirements and quality assurance provisions for the manufacture and acceptance of two types of basic lead styphnate for use in explosive priming compositions. (See 6.1) Intended Use: Basic lead styphnate is lead trinitroresorcinate with hydroxy groups, C₆H(NO₂)₃ (OPbOH)₂, and is intended for use in priming compositions and detonators. Basic lead styphnate is classified as a high explosive. All necessary precautions in the manufacture, handling, and storage of such material should be observed. Only conductive plastic or horn implements shall be used for stirring or transferring. Never use metallic implements and never scrape residual material out of glass equipment. Destroy residual or excess material by dissolving in ammonium acetate solution, collecting the washings in a large beaker and then slowly adding dilute sulfuric acid to precipitate lead sulfate.
language	English
title	MIL-L-16355E (1)	num
title	LEAD STYPHNATE, BASIC	en
type	standard
page	26
status	Active
tree	ARMY - AR - US Army Research Devlp & Engr Command, Armament Research Devlp & Engr Center:;2007
contenttype	fulltext