درباره ما
MIL-L-16355E (1)
LEAD STYPHNATE, BASIC
Year: 2007
Abstract: This specification covers the requirements and quality assurance provisions for the manufacture and acceptance of two types of basic lead styphnate for use in explosive priming compositions. (See 6.1) Intended Use: Basic lead styphnate is lead trinitroresorcinate with hydroxy groups, C6H(NO2)3 (OPbOH)2, and is intended for use in priming compositions and detonators. Basic lead styphnate is classified as a high explosive. All necessary precautions in the manufacture, handling, and storage of such material should be observed. Only conductive plastic or horn implements shall be used for stirring or transferring. Never use metallic implements and never scrape residual material out of glass equipment. Destroy residual or excess material by dissolving in ammonium acetate solution, collecting the washings in a large beaker and then slowly adding dilute sulfuric acid to precipitate lead sulfate.
-
Statistics
MIL-L-16355E (1)
Show full item record
| contributor author | ARMY - AR - US Army Research Devlp & Engr Command, Armament Research Devlp & Engr Center | |
| date accessioned | 2017-09-04T17:20:27Z | |
| date available | 2017-09-04T17:20:27Z | |
| date copyright | 05/04/2007 | |
| date issued | 2007 | |
| identifier other | ZQCRACAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std/handle/yse/143617 | |
| description abstract | This specification covers the requirements and quality assurance provisions for the manufacture and acceptance of two types of basic lead styphnate for use in explosive priming compositions. (See 6.1) Intended Use: Basic lead styphnate is lead trinitroresorcinate with hydroxy groups, C6H(NO2)3 (OPbOH)2, and is intended for use in priming compositions and detonators. Basic lead styphnate is classified as a high explosive. All necessary precautions in the manufacture, handling, and storage of such material should be observed. Only conductive plastic or horn implements shall be used for stirring or transferring. Never use metallic implements and never scrape residual material out of glass equipment. Destroy residual or excess material by dissolving in ammonium acetate solution, collecting the washings in a large beaker and then slowly adding dilute sulfuric acid to precipitate lead sulfate. | |
| language | English | |
| title | MIL-L-16355E (1) | num |
| title | LEAD STYPHNATE, BASIC | en |
| type | standard | |
| page | 26 | |
| status | Active | |
| tree | ARMY - AR - US Army Research Devlp & Engr Command, Armament Research Devlp & Engr Center:;2007 | |
| contenttype | fulltext |