Search
Now showing items 21-30 of 507
ECA 186-6E: Passive Electronic Component Parts, Test Methods for; Method 6: Mechanical Robustness of Terminals
Abstract: PURPOSE
These tests are intended to determine the ability of terminals to withstand the usual stresses which may be applied during assembly or disassembly operations. Several types of tests are provided ...
These tests are intended to determine the ability of terminals to withstand the usual stresses which may be applied during assembly or disassembly operations. Several types of tests are provided ...
ECA EIA-481-D: 8 mm THROUGH 200 mm EMBOSSED CARRIER TAPING AND 8 mm & 12 mm PUNCHED CARRIER TAPING OF SURFACE MOUNT COMPONENTS FOR AUTOMATIC HANDLING
Abstract: This Standard covers requirements for taping surface mount components. Complementary standards for specialized taping requirements are included in the addendum.
ECA EIA-364-65B: TP-65B MIXED FLOWING TEST PROCEDURE FOR ELECTRICAL CONNECTORS CONTACTS AND SOCKETS
Abstract: This standard establishes the test procedure for producing environmentally related corrosive atmospheres to determine the reaction of plated or unplated surfaces when exposed to different concentrations of flowing gas ...
ECA IS-84: Interim Detail Specification for 2.5 mm Two Part Connector for Use in Electronic Equipment - Stabilized: May 2013
Abstract: This standard is applicable to modular two-part connectors particularly designed for use with printed boards in equipment for telecommunications requirements in electronic devices employing similar techniques. The group ...
ECA TEP140: Proposed Acceptance Sampling Procedures for Small Lots
Abstract: INTRODUCTION
These procedures were formulated by JEDEC Committee JT-16 on Government Liason and approved by the JEDEC Electron Tube Council. It is a revision of the 1963 publication which first expressed ...
These procedures were formulated by JEDEC Committee JT-16 on Government Liason and approved by the JEDEC Electron Tube Council. It is a revision of the 1963 publication which first expressed ...
ECA RS-209-A: Electron Tubes - Includes Supplement RS-209-A-1: 08/1965 and Supplement RS-209-A-2: 06/1968
Abstract: INTRODUCTION
This Standard supersedes RS-209 and RS-209-1. It includes all items prepared by JEDEC Committee JT-8 on Mechanical Standardization, and approved by the Electronic Industries Association ...
This Standard supersedes RS-209 and RS-209-1. It includes all items prepared by JEDEC Committee JT-8 on Mechanical Standardization, and approved by the Electronic Industries Association ...
ECA EIA/ECA-961: QUALIFICATION SPECIFICATION FOR DIE LEVEL NETWORKS WITH SOLDER BUMP INTERCONNECTS
Abstract: Description
This specification defines the qualification program for Integrated Passive Devices (IPD) with die level solder bump interconnects. The qualification program is defined in Table 1. Specification ...
This specification defines the qualification program for Integrated Passive Devices (IPD) with die level solder bump interconnects. The qualification program is defined in Table 1. Specification ...
ECA EIA-364-03C: TP-03C ALTITUDE IMMERSION TEST PROCEDURE FOR ELECTRICAL CONNECTORS
Abstract: This standard establishes a test method to determine the ability of the connector-to-wire and interface area seals of a mated connector assembly to perform satisfactorily during and subsequent to simulated rapid descents ...