درباره ما
NFPA T2.12.1
Hydraulic fluid power – Systems and products – Method of measuring average steady-state pressure [to be used in conjunction with NFPA/T2.12.10] - Second Edition
Organization:
NFPA - (NFPA) - National Fluid Power Association
Year: 2009
Abstract: This standard is limited to the measurement of average steady-state static pressure in a closed conductor that meets the following criteria:
— must be transmitting hydraulic fluid power;
— average fluid velocities are less than 25 meters per second (82 ft/sec);
— average steady-state static pressure is less than 70 Mpa (10,000 psi);
— inside diameters are greater than 3.0 millimeters (0.120 in);
— sensor is not flush-mounted with, or an integral part of, the closed fluid conductor wall.
— must be transmitting hydraulic fluid power;
— average fluid velocities are less than 25 meters per second (82 ft/sec);
— average steady-state static pressure is less than 70 Mpa (10,000 psi);
— inside diameters are greater than 3.0 millimeters (0.120 in);
— sensor is not flush-mounted with, or an integral part of, the closed fluid conductor wall.
Collections
:
Show full item record
| contributor author | NFPA - (NFPA) - National Fluid Power Association | |
| date accessioned | 2017-09-04T17:26:54Z | |
| date available | 2017-09-04T17:26:54Z | |
| date copyright | 07/08/2002 (R 2009) | |
| date issued | 2009 | |
| identifier other | CLKJOCAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std/handle/yse/149988 | |
| description abstract | This standard is limited to the measurement of average steady-state static pressure in a closed conductor that meets the following criteria: — must be transmitting hydraulic fluid power; — average fluid velocities are less than 25 meters per second (82 ft/sec); — average steady-state static pressure is less than 70 Mpa (10,000 psi); — inside diameters are greater than 3.0 millimeters (0.120 in); — sensor is not flush-mounted with, or an integral part of, the closed fluid conductor wall. | |
| language | English | |
| title | NFPA T2.12.1 | num |
| title | Hydraulic fluid power – Systems and products – Method of measuring average steady-state pressure [to be used in conjunction with NFPA/T2.12.10] - Second Edition | en |
| type | standard | |
| page | 15 | |
| status | Active | |
| tree | NFPA - (NFPA) - National Fluid Power Association:;2009 | |
| contenttype | fulltext |