درباره ما
NACE RP0391
Materials for the Handling and Storage of commercial Concentrated (90 to 100%) Sulfuric Acid at Ambient Temperatures - Item No:21050
Organization:
NACE - NACE International
Year: 2001
Abstract: This standard provides information about the design and selection of materials used in the handling and storage of commercial concentrated sulfuric acid at ambient temperatures. The term ambient is intended to include temperatures up to 50°C (120°F). This is the approximate maximum temperature that arises from solar heating of piping or vessels in a tropical climate.
This standard does not consider sulfuric acid strengths above 100% or below 90% by weight.
For completeness, this standard includes Appendix A, containing a listing of all alloys mentioned in this standard, and Appendix B, which gives guidance on applicable materials for a sulfuric acid dilution system.
Concentrated sulfuric acid is a colorless, odorless, syrupy liquid whose oily appearance suggested the name oleum (Latin for oil) to early chemists.(footnote 1) Today, the term oleum is used only for sulfuric acid containing free sulfur trioxide. The term sulfuric acid is used to refer to acid that does not contain free sulfur trioxide.
1.5 The term concentrated sulfuric acid broadly refers to the concentration range of 90 to 100% by weight. Commercial acid is usually stored at 93% concentration because its minimum freezing point is 34°C (30°F). Sulfuric acid is commonly transported in the 98 to 99.5% concentration range. The latter limit is imposed by the much greater corrosiveness of 100% sulfuric acid to carbon steel and by its higher freezing point of about 7°C (45°F).
Concentrated sulfuric acid is an oxidizing agent, and because of its affinity for water, it is also a desiccant. The major problems in its handling and storage relate to its hygroscopic nature (absorbing atmospheric humidity), the exothermic reactivity with water on dilution, and velocity effects that tend to accelerate corrosion of iron- and leadbased alloys.
footnote 1 - Sulfuric acid was called oil of vitriol (from the Latin vitreum for glass) because of the glassy appearance of some metallic sulfates.
This standard does not consider sulfuric acid strengths above 100% or below 90% by weight.
For completeness, this standard includes Appendix A, containing a listing of all alloys mentioned in this standard, and Appendix B, which gives guidance on applicable materials for a sulfuric acid dilution system.
Concentrated sulfuric acid is a colorless, odorless, syrupy liquid whose oily appearance suggested the name oleum (Latin for oil) to early chemists.(footnote 1) Today, the term oleum is used only for sulfuric acid containing free sulfur trioxide. The term sulfuric acid is used to refer to acid that does not contain free sulfur trioxide.
1.5 The term concentrated sulfuric acid broadly refers to the concentration range of 90 to 100% by weight. Commercial acid is usually stored at 93% concentration because its minimum freezing point is 34°C (30°F). Sulfuric acid is commonly transported in the 98 to 99.5% concentration range. The latter limit is imposed by the much greater corrosiveness of 100% sulfuric acid to carbon steel and by its higher freezing point of about 7°C (45°F).
Concentrated sulfuric acid is an oxidizing agent, and because of its affinity for water, it is also a desiccant. The major problems in its handling and storage relate to its hygroscopic nature (absorbing atmospheric humidity), the exothermic reactivity with water on dilution, and velocity effects that tend to accelerate corrosion of iron- and leadbased alloys.
footnote 1 - Sulfuric acid was called oil of vitriol (from the Latin vitreum for glass) because of the glassy appearance of some metallic sulfates.
Collections
:
Show full item record
| contributor author | NACE - NACE International | |
| date accessioned | 2017-09-04T17:34:16Z | |
| date available | 2017-09-04T17:34:16Z | |
| date copyright | 2001.06.15 | |
| date issued | 2001 | |
| identifier other | DEWSSAAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std/handle/yse/157175 | |
| description abstract | This standard provides information about the design and selection of materials used in the handling and storage of commercial concentrated sulfuric acid at ambient temperatures. The term ambient is intended to include temperatures up to 50°C (120°F). This is the approximate maximum temperature that arises from solar heating of piping or vessels in a tropical climate. This standard does not consider sulfuric acid strengths above 100% or below 90% by weight. For completeness, this standard includes Appendix A, containing a listing of all alloys mentioned in this standard, and Appendix B, which gives guidance on applicable materials for a sulfuric acid dilution system. Concentrated sulfuric acid is a colorless, odorless, syrupy liquid whose oily appearance suggested the name oleum (Latin for oil) to early chemists.(footnote 1) Today, the term oleum is used only for sulfuric acid containing free sulfur trioxide. The term sulfuric acid is used to refer to acid that does not contain free sulfur trioxide. 1.5 The term concentrated sulfuric acid broadly refers to the concentration range of 90 to 100% by weight. Commercial acid is usually stored at 93% concentration because its minimum freezing point is 34°C (30°F). Sulfuric acid is commonly transported in the 98 to 99.5% concentration range. The latter limit is imposed by the much greater corrosiveness of 100% sulfuric acid to carbon steel and by its higher freezing point of about 7°C (45°F). Concentrated sulfuric acid is an oxidizing agent, and because of its affinity for water, it is also a desiccant. The major problems in its handling and storage relate to its hygroscopic nature (absorbing atmospheric humidity), the exothermic reactivity with water on dilution, and velocity effects that tend to accelerate corrosion of iron- and leadbased alloys. footnote 1 - Sulfuric acid was called oil of vitriol (from the Latin vitreum for glass) because of the glassy appearance of some metallic sulfates. | |
| language | English | |
| title | NACE RP0391 | num |
| title | Materials for the Handling and Storage of commercial Concentrated (90 to 100%) Sulfuric Acid at Ambient Temperatures - Item No:21050 | en |
| type | standard | |
| page | 13 | |
| status | Active | |
| tree | NACE - NACE International:;2001 | |
| contenttype | fulltext |