درباره ما
NFPA 80
Standard for Fire Doors and Other Opening Protectives - Effective Date: 06/18/2012
Organization:
NFPA - (NFPA) - National Fluid Power Association
Year: 2013
Abstract: This standard regulates the installation and maintenance of assemblies and devices used to protect openings in walls, floors, and ceilings against the spread of fire and smoke within, into, or out of buildings.
With the exception of fabric fire safety curtain assemblies, this standard addresses assemblies that have been subjected to standardized fire tests.
Incinerator doors, record room doors, and vault doors are not covered in this standard.
Requirements for horizontally sliding, vertically sliding, and swinging doors as used in this standard do not apply to hoistway doors for elevators and dumbwaiters.
This standard does not cover fire resistantance glazing materials and horizontally sliding accordion or folding assemblies fabricated for use as walls and tested as wall assemblies in accordance with ASTM E119, Standard Test Methods for Fire Tests of Building Construction and Materials.
Purpose.
The purpose of this document is to set national standards for the installation and maintenance of assemblies used to protect protect openings in walls, floors, and ceilings to prevent or retard the spread of fire and smoke within, into, or out of buildings.
This document is also intended to give guidance to authorities having jurisdiction (AHJs) so they can determine in the field if an assembly meets the requirements and standards outlined in this document and if maintenance standards have been maintained.
It is not the purpose of this standard to establish the degree of protection required or to constitute the approval of any product.
With the exception of fabric fire safety curtain assemblies, this standard addresses assemblies that have been subjected to standardized fire tests.
Incinerator doors, record room doors, and vault doors are not covered in this standard.
Requirements for horizontally sliding, vertically sliding, and swinging doors as used in this standard do not apply to hoistway doors for elevators and dumbwaiters.
This standard does not cover fire resistantance glazing materials and horizontally sliding accordion or folding assemblies fabricated for use as walls and tested as wall assemblies in accordance with ASTM E119, Standard Test Methods for Fire Tests of Building Construction and Materials.
Purpose.
The purpose of this document is to set national standards for the installation and maintenance of assemblies used to protect protect openings in walls, floors, and ceilings to prevent or retard the spread of fire and smoke within, into, or out of buildings.
This document is also intended to give guidance to authorities having jurisdiction (AHJs) so they can determine in the field if an assembly meets the requirements and standards outlined in this document and if maintenance standards have been maintained.
It is not the purpose of this standard to establish the degree of protection required or to constitute the approval of any product.
Collections
:
Show full item record
| contributor author | NFPA - (NFPA) - National Fluid Power Association | |
| date accessioned | 2017-09-04T17:43:50Z | |
| date available | 2017-09-04T17:43:50Z | |
| date copyright | 01/01/2013 | |
| date issued | 2013 | |
| identifier other | EERBZEAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std/handle/yse/166948 | |
| description abstract | This standard regulates the installation and maintenance of assemblies and devices used to protect openings in walls, floors, and ceilings against the spread of fire and smoke within, into, or out of buildings. With the exception of fabric fire safety curtain assemblies, this standard addresses assemblies that have been subjected to standardized fire tests. Incinerator doors, record room doors, and vault doors are not covered in this standard. Requirements for horizontally sliding, vertically sliding, and swinging doors as used in this standard do not apply to hoistway doors for elevators and dumbwaiters. This standard does not cover fire resistantance glazing materials and horizontally sliding accordion or folding assemblies fabricated for use as walls and tested as wall assemblies in accordance with ASTM E119, Standard Test Methods for Fire Tests of Building Construction and Materials. Purpose. The purpose of this document is to set national standards for the installation and maintenance of assemblies used to protect protect openings in walls, floors, and ceilings to prevent or retard the spread of fire and smoke within, into, or out of buildings. This document is also intended to give guidance to authorities having jurisdiction (AHJs) so they can determine in the field if an assembly meets the requirements and standards outlined in this document and if maintenance standards have been maintained. It is not the purpose of this standard to establish the degree of protection required or to constitute the approval of any product. | |
| language | English | |
| title | NFPA 80 | num |
| title | Standard for Fire Doors and Other Opening Protectives - Effective Date: 06/18/2012 | en |
| type | standard | |
| page | 95 | |
| status | Active | |
| tree | NFPA - (NFPA) - National Fluid Power Association:;2013 | |
| contenttype | fulltext |