Show simple item record

Lessons Learned – Pad-39A Sandblast Pot Mishap

contributor authorNASA - National Aeronautics and Space Administration (NASA)
date accessioned2017-09-04T17:55:16Z
date available2017-09-04T17:55:16Z
date copyright02/16/2011
date issued2011
identifier otherFJHOEEAAAAAAAAAA.pdf
identifier urihttp://yse.yabesh.ir/std/handle/yse/178373
description abstractAbstract:
A worker disconnected a hose from the vent pipe attached to a sandblast pot, the stored pressure energy in the pot caused the pipe to spin, and the worker was struck several times by the spinning vent pipe. The injured worker and several others involved in the sandblasting operation were employed under a subcontract to perform corrosion control, including sandblasting and painting. The oversight of equipment configuration and operations delegated to subcontractors can lead to unsafe operations. All pressure system maintenance should be performed by approved procedures that ensure configuration control and prime contractors should explicitly identify in their subcontracts the maintenance that subcontractors are authorized to perform without obtaining prime-contractor approval.
languageEnglish
titleNASA-LLIS-5156num
titleLessons Learned – Pad-39A Sandblast Pot Mishapen
typestandard
page2
statusActive
treeNASA - National Aeronautics and Space Administration (NASA):;2011
contenttypefulltext
subject keywordsAcquisition / Procurement Strategy and Planning
subject keywordsCommunications between Different Offices and Contractor Personnel
subject keywordsConfiguration Change Control
subject keywordsContractor Relationships
subject keywordsFacilities
subject keywordsMaintenance
subject keywordsPressure Vessels
subject keywordsReview systems and boards
subject keywordsRisk Management
subject keywordsRole of Civil Service Technical Staff versus Contractor Staff


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record