Search
Now showing items 41-50 of 344
NACE 7H100: Evaluation of Boiler Tube Deposit Mass Loading (Deposit Weight Density) Methodology - Item No. 24206
Abstract: Introduction
Deposits or scale on the water/steam sides of boiler tubes result from in situ oxidation of the tube material, transport and precipitation of corrosion products from other locations within ...
Deposits or scale on the water/steam sides of boiler tubes result from in situ oxidation of the tube material, transport and precipitation of corrosion products from other locations within ...
NACE 05101: State-of-the-Art Survey on Corrosion of Steel Piling in Soils - Item No. 24216
Abstract: Introduction
Field investigations by Romanoff and other researchers at the National Institute of Standards and Technology (NIST)(formerly the National Bureau of Standards [NBS])(1) in the ...
Field investigations by Romanoff and other researchers at the National Institute of Standards and Technology (NIST)(formerly the National Bureau of Standards [NBS])(1) in the ...
NACE SP0575: Internal Cathodic Protection (CP) Systems in Oil-Treating Vessels - Item No. 21015
Abstract: General
This standard presents recommended practices for the cathodic protection (CP) of internal surfaces of oil-treating vessels, heat exchangers, or the water side of process vessels.
The ...
This standard presents recommended practices for the cathodic protection (CP) of internal surfaces of oil-treating vessels, heat exchangers, or the water side of process vessels.
The ...
NACE SP0169: Control of External Corrosion on Underground or Submerged Metallic Piping Systems - Item No. 21001
Abstract: General
This standard presents accepted methods and practices for the control of external corrosion on buried or submerged steel, stainless steel, cast iron, ductile iron, copper, and aluminum ...
This standard presents accepted methods and practices for the control of external corrosion on buried or submerged steel, stainless steel, cast iron, ductile iron, copper, and aluminum ...
NACE RP0402: Field-Applied Fusion-Bonded Epoxy (FBE) Pipe Coating Systems for Girth Weld Joints: Application, Performance, and Quality Control - Item No:21096
Abstract: This standard presents guidelines for establishing minimum requirements to ensure proper application and performance of a field-applied fusion-bonded epoxy (FBE) coating system to the external surfaces of pipe at girth ...
NACE MR0175/ISO 15156 CIR 1 TO PT 3: Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys TECHNICAL CIRCULAR 1 - Second Edition; TECHNICAL CIRCULAR 1 to Part 3
Abstract: Foreword
The establishment of the NACE/ISO 15156 Maintenance Agency was confirmed by the ISO Technical Management Board in June 2007. A copy of the TMB Vote-Form Number: 34/2007 giving the rules of procedure for the maintenance agency can be obtained from the ISO TMB Secretariat. It is also available from the I...
The establishment of the NACE/ISO 15156 Maintenance Agency was confirmed by the ISO Technical Management Board in June 2007. A copy of the TMB Vote-Form Number: 34/2007 giving the rules of procedure for the maintenance agency can be obtained from the ISO TMB Secretariat. It is also available from the I...
NACE SP0187: Design Considerations for Corrosion Control of Reinforcing Steel in Concrete - Item No. 21034
Abstract: Scope and Limitations
Because of the concrete damage caused by the corrosion products formed on reinforcing steel, the designer should consider certain corrosion criteria during the design of the structure. Design and ...
Because of the concrete damage caused by the corrosion products formed on reinforcing steel, the designer should consider certain corrosion criteria during the design of the structure. Design and ...
NACE 8X294: Review of Published Literature on Wet H2S Cracking of Steels Through 1989 - Item No. 24185
Abstract: Foreword
This NACE technical committee report summarizes results of laboratory tests and investigations of field and plant experience presented in various sources of the published literature pertaining ...
This NACE technical committee report summarizes results of laboratory tests and investigations of field and plant experience presented in various sources of the published literature pertaining ...
NACE SP0274: High-Voltage Electrical Inspection of Pipeline Coatings - Item No. 21010
Abstract: General
Electrical inspection (holiday detection) is a test of the continuity of a protective coating. This type of inspection does not provide information concerning coating resistance, bond, physical ...
Electrical inspection (holiday detection) is a test of the continuity of a protective coating. This type of inspection does not provide information concerning coating resistance, bond, physical ...
NACE TM0183: Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods in an Aqueous Flowing Environment - Item No. 21213
Abstract: GeneralÂ
The test method set forth in this standard can be used to evaluate and compare the corrosion protection that various internal plastic coatings afford oilfield tubular goods. Using ...
The test method set forth in this standard can be used to evaluate and compare the corrosion protection that various internal plastic coatings afford oilfield tubular goods. Using ...