UL - UL: Recent submissions
Now showing items 841-860 of 6633
-
UL 586
Abstract: These requirements cover high-efficiency, particulate, air-filter units intended for the removal of very fine particulate matter (not less than 99.97 percent of 0.3 micron diameter particles) from the air of industrial and ... -
UL 60079-5
Abstract: This part of IEC 60079 contains specific requirements for the construction, testing and marking of electrical equipment, parts of electrical equipment and Ex components in the type of protection powder filling "q", intended ... -
UL 810 BULLETIN
Abstract: The requirements in Part I of this Standard apply to enclosed capacitors with integral protection intended to reduce the risk of rupture and venting of the capacitor enclosure under internal fault conditions. These ... -
UL 710
Abstract: These requirements cover Type I commercial kitchen exhaust hoods intended for placement over commercial cooking equipment. Exhaust hoods with and without exhaust dampers are covered by these requirements.
Exhaust hoods ... -
UL 1077 BULLETIN
Abstract: These requirements apply to supplementary protectors intended for use as overcurrent, or over- or under-voltage protection within an appliance or other electrical equipment where branch circuit overcurrent protection is ... -
UL 50
Abstract: This standard applies to enclosures for electrical equipment intended to be installed and used in non-hazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1, the provisions of the National ... -
UL 1230
Abstract: These requirements cover amateur movie and video lights intended to be hand held or attached to a camera. These lights may be cord connected, rated at a nominal 120 V for use with premises wiring systems in accordance with ... -
UL 563
Abstract: These requirements cover automatic ice makers designed for connection to alternating-current circuits rated not more than 600 volts.
These requirements apply to unitary and remote ice makers. For the purpose of this ... -
UL 80
Abstract: These requirements cover steel primary, steel secondary, and steel diked type atmospheric storage tanks from 60 to 660 gallons (227 to 2500 L) intended primarily for the storage and supply of heating fuels for oil burning ... -
UL 2166 BULLETIN
Abstract: These requirements cover the construction and operation of halocarbon clean agent fire extinguishing system units intended to be installed, inspected, tested, and maintained in accordance with the Standard on Clean Agent ... -
UL 10B
Abstract: These methods of fire tests are applicable to door assemblies of various materials and types of construction for use in wall openings to retard the passage of fire.
Tests made in conformity with these test methods ... -
UL 1063 BULLETIN
Abstract: These requirements cover all-thermoplastic Type MTW, 600-V, machine-tool wires and cables for use as specified in the National Electrical Code (ANSI/NFPA 70), and in the National Fire Protection Association Electrical ...

درباره ما