MIL-DTL-64159B
CAMOUFLAGE COATING, WATER DISPERSIBLE ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT
Year: 2011
Abstract: This specification covers water-dispersible, polymeric flattened, chemical agent resistant, aliphatic polyurethane camouflage coatings for use as a finish coat on all military tactical equipment, which includes ground, aviation and related support assets. The materials are free of volatile organic hazardous air pollutants (VOHAP-free), free of inorganic hazardous air pollutants (HAPs) other than cobalt and non-hexavalent chromium, and have a maximum volatile organic compound (VOC) content of 220 grams/liter (g/l) (1.8 pounds/gallon (lbs/gal)) as packaged.Intended Use: Use of this camouflage coating is intended to provide surfaces that are easily and effectively decontaminated after exposure to liquid chemical agents. This coating may be used in areas where air pollution regulations are in force. It is applied over epoxy primers MILPRF- 23377, MIL-PRF-85582, MIL-DTL-53022, MIL-DTL-53030, MIL-PRF-32348, type I or electrodeposited primer MIL-DTL-53084 depending on the substrate or regulatory requirements. For adequate camouflage properties, it is necessary to apply the coatings to a minimum dry film thickness of 1.8 mils (45 microns).
Subject: Aircraft
Show full item record
contributor author | ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate | |
date accessioned | 2017-09-04T18:11:26Z | |
date available | 2017-09-04T18:11:26Z | |
date copyright | 01/24/2011 | |
date issued | 2011 | |
identifier other | GZTERDAAAAAAAAAA.pdf | |
identifier uri | http://yse.yabesh.ir/std/handle/yse/194423 | |
description abstract | This specification covers water-dispersible, polymeric flattened, chemical agent resistant, aliphatic polyurethane camouflage coatings for use as a finish coat on all military tactical equipment, which includes ground, aviation and related support assets. The materials are free of volatile organic hazardous air pollutants (VOHAP-free), free of inorganic hazardous air pollutants (HAPs) other than cobalt and non-hexavalent chromium, and have a maximum volatile organic compound (VOC) content of 220 grams/liter (g/l) (1.8 pounds/gallon (lbs/gal)) as packaged.Intended Use: Use of this camouflage coating is intended to provide surfaces that are easily and effectively decontaminated after exposure to liquid chemical agents. This coating may be used in areas where air pollution regulations are in force. It is applied over epoxy primers MILPRF- 23377, MIL-PRF-85582, MIL-DTL-53022, MIL-DTL-53030, MIL-PRF-32348, type I or electrodeposited primer MIL-DTL-53084 depending on the substrate or regulatory requirements. For adequate camouflage properties, it is necessary to apply the coatings to a minimum dry film thickness of 1.8 mils (45 microns). | |
language | English | |
title | MIL-DTL-64159B | num |
title | CAMOUFLAGE COATING, WATER DISPERSIBLE ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT | en |
type | standard | |
page | 27 | |
status | Active | |
tree | ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2011 | |
contenttype | fulltext | |
subject keywords | Aircraft | |
subject keywords | CARC | |
subject keywords | Colors | |
subject keywords | Equipment | |
subject keywords | Pigment | |
subject keywords | Total solids | |
subject keywords | Vehicle solids |