ACI 530/530.1 ERTA
Building Code Requirements and Specification for Masonry Structures
Organization:
ACI - American Concrete Institute
Year: 2011
Abstract: Minimum requirements
This Code provides minimum requirements for the structural design and construction of masonry elements consisting of masonry units bedded in mortar.
Governing building code
This Code supplements the legally adopted building code and shall govern in all matters pertaining to structural design and construction of masonry elements, except where this Code is in conflict with requirements in the legally adopted building code. In areas without a legally adopted building code, this Code defines the minimum acceptable standards of design and construction practice.
Design procedures
Masonry structures and their component members shall be designed in accordance with the provisions of this Chapter and one of the following:
(a) Allowable Stress Design of Masonry: Chapter 2.
(b) Strength Design of Masonry: Chapter 3.
(c) Prestressed Masonry: Chapter 4.
(d) Empirical Design of Masonry: Chapter 5.
(e) Veneer: Chapter 6.
(f) Glass Unit Masonry: Chapter 7.
(g) Strength Design of Autoclaved Aerated Concrete (AAC) Masonry: Appendix A.
(h) Masonry Infill, Appendix B.
SI information
SI values shown in parentheses are not part of this Code. The equations in this document are for use with the specified inch-pound units only. The equivalent equations for use with SI units are provided in Conversion of Units on Page C-201.
This Code provides minimum requirements for the structural design and construction of masonry elements consisting of masonry units bedded in mortar.
Governing building code
This Code supplements the legally adopted building code and shall govern in all matters pertaining to structural design and construction of masonry elements, except where this Code is in conflict with requirements in the legally adopted building code. In areas without a legally adopted building code, this Code defines the minimum acceptable standards of design and construction practice.
Design procedures
Masonry structures and their component members shall be designed in accordance with the provisions of this Chapter and one of the following:
(a) Allowable Stress Design of Masonry: Chapter 2.
(b) Strength Design of Masonry: Chapter 3.
(c) Prestressed Masonry: Chapter 4.
(d) Empirical Design of Masonry: Chapter 5.
(e) Veneer: Chapter 6.
(f) Glass Unit Masonry: Chapter 7.
(g) Strength Design of Autoclaved Aerated Concrete (AAC) Masonry: Appendix A.
(h) Masonry Infill, Appendix B.
SI information
SI values shown in parentheses are not part of this Code. The equations in this document are for use with the specified inch-pound units only. The equivalent equations for use with SI units are provided in Conversion of Units on Page C-201.
Subject: AAC
Collections
:
-
Statistics
ACI 530/530.1 ERTA
Show full item record
contributor author | ACI - American Concrete Institute | |
date accessioned | 2017-09-04T18:35:16Z | |
date available | 2017-09-04T18:35:16Z | |
date copyright | 40822 | |
date issued | 2011 | |
identifier other | JIJHUEAAAAAAAAAA.pdf | |
identifier uri | http://yse.yabesh.ir/std/handle/yse/217310 | |
description abstract | Minimum requirements This Code provides minimum requirements for the structural design and construction of masonry elements consisting of masonry units bedded in mortar. Governing building code This Code supplements the legally adopted building code and shall govern in all matters pertaining to structural design and construction of masonry elements, except where this Code is in conflict with requirements in the legally adopted building code. In areas without a legally adopted building code, this Code defines the minimum acceptable standards of design and construction practice. Design procedures Masonry structures and their component members shall be designed in accordance with the provisions of this Chapter and one of the following: (a) Allowable Stress Design of Masonry: Chapter 2. (b) Strength Design of Masonry: Chapter 3. (c) Prestressed Masonry: Chapter 4. (d) Empirical Design of Masonry: Chapter 5. (e) Veneer: Chapter 6. (f) Glass Unit Masonry: Chapter 7. (g) Strength Design of Autoclaved Aerated Concrete (AAC) Masonry: Appendix A. (h) Masonry Infill, Appendix B. SI information SI values shown in parentheses are not part of this Code. The equations in this document are for use with the specified inch-pound units only. The equivalent equations for use with SI units are provided in Conversion of Units on Page C-201. | |
language | English | |
title | ACI 530/530.1 ERTA | num |
title | Building Code Requirements and Specification for Masonry Structures | en |
type | standard | |
page | 2 | |
status | Active | |
tree | ACI - American Concrete Institute:;2011 | |
contenttype | fulltext | |
subject keywords | AAC | |
subject keywords | masonry allowable stress design | |
subject keywords | anchors (fasteners) | |
subject keywords | anchorage (structural) | |
subject keywords | autoclaved aerated concrete masonry | |
subject keywords | beams | |
subject keywords | building codes | |
subject keywords | cements | |
subject keywords | clay brick | |
subject keywords | clay tile | |
subject keywords | columns | |
subject keywords | compressive strength | |
subject keywords | concrete block | |
subject keywords | concrete brick | |
subject keywords | construction | |
subject keywords | detailing | |
subject keywords | empirical design | |
subject keywords | flexural strength | |
subject keywords | glass units | |
subject keywords | grout | |
subject keywords | grouting | |
subject keywords | joints | |
subject keywords | loads (forces) | |
subject keywords | masonry cements | |
subject keywords | masonry load bearing walls | |
subject keywords | masonry mortars | |
subject keywords | masonry walls | |
subject keywords | modulus of elasticity | |
subject keywords | pilasters | |
subject keywords | prestressed masonry | |
subject keywords | quality assurance | |
subject keywords | reinforced masonry | |
subject keywords | reinforcing steel | |
subject keywords | seismic requirements | |
subject keywords | shear | |
subject keywords | specifications | |
subject keywords | splicing | |
subject keywords | strength | |
subject keywords | strength design | |
subject keywords | stresses | |
subject keywords | structural analysis | |
subject keywords | structural design | |
subject keywords | ties | |
subject keywords | unreinforced masonry | |
subject keywords | veneers | |
subject keywords | walls |