UL 1703 BULLETIN

UL Standard for Safety Flat-Plate Photovoltaic Modules and Panels - COMMENTS DUE: July 13, 2015

contributor author	UL - UL
date accessioned	2017-09-04T18:44:35Z
date available	2017-09-04T18:44:35Z
date copyright	2015.06.29
date issued	2015
identifier other	KFDSKFAAAAAAAAAA.pdf
identifier uri	http://yse.yabesh.ir/std/handle/yse/226067
description abstract	General A fire rated module or panel intended for stand-off or rack mounting in combination with roof coverings shall be installed as shown in this Section and according the manufacturer's installation instructions for both the module and mounting system with respect to the fire performance requirements for Class A, B, or C when the module or panel is marked as being fire rated as specified in 47.11. For installations that are wider than the 40 inch (1016 mm) standard test deck, supports may need to be fabricated on which to mount the mounting system. Any support system is to be developed to ensure consistency with installation instructions and field conditions. The mounting system with installed PV module(s) or panel(s) shall be centered on the test deck and extend to the edges of the test deck. The mounted modules or panels shall be tested in combination with the following roof constructions:
language	English
title	UL 1703 BULLETIN	num
title	UL Standard for Safety Flat-Plate Photovoltaic Modules and Panels - COMMENTS DUE: July 13, 2015	en
type	standard
page	4
status	Active
tree	UL - UL:;2015
contenttype	fulltext