درباره ما
UL 1703 BULLETIN
UL Standard for Safety Flat-Plate Photovoltaic Modules and Panels - COMMENTS DUE: July 13, 2015
Organization:
UL - UL
Year: 2015
Abstract: General
A fire rated module or panel intended for stand-off or rack mounting in combination with roof coverings shall be installed as shown in this Section and according the manufacturer's installation instructions for both the module and mounting system with respect to the fire performance requirements for Class A, B, or C when the module or panel is marked as being fire rated as specified in 47.11. For installations that are wider than the 40 inch (1016 mm) standard test deck, supports may need to be fabricated on which to mount the mounting system. Any support system is to be developed to ensure consistency with installation instructions and field conditions. The mounting system with installed PV module(s) or panel(s) shall be centered on the test deck and extend to the edges of the test deck. The mounted modules or panels shall be tested in combination with the following roof constructions:
A fire rated module or panel intended for stand-off or rack mounting in combination with roof coverings shall be installed as shown in this Section and according the manufacturer's installation instructions for both the module and mounting system with respect to the fire performance requirements for Class A, B, or C when the module or panel is marked as being fire rated as specified in 47.11. For installations that are wider than the 40 inch (1016 mm) standard test deck, supports may need to be fabricated on which to mount the mounting system. Any support system is to be developed to ensure consistency with installation instructions and field conditions. The mounting system with installed PV module(s) or panel(s) shall be centered on the test deck and extend to the edges of the test deck. The mounted modules or panels shall be tested in combination with the following roof constructions:
Collections
:
-
Statistics
UL 1703 BULLETIN
Show full item record
| contributor author | UL - UL | |
| date accessioned | 2017-09-04T18:44:35Z | |
| date available | 2017-09-04T18:44:35Z | |
| date copyright | 2015.06.29 | |
| date issued | 2015 | |
| identifier other | KFDSKFAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std/handle/yse/226067 | |
| description abstract | General A fire rated module or panel intended for stand-off or rack mounting in combination with roof coverings shall be installed as shown in this Section and according the manufacturer's installation instructions for both the module and mounting system with respect to the fire performance requirements for Class A, B, or C when the module or panel is marked as being fire rated as specified in 47.11. For installations that are wider than the 40 inch (1016 mm) standard test deck, supports may need to be fabricated on which to mount the mounting system. Any support system is to be developed to ensure consistency with installation instructions and field conditions. The mounting system with installed PV module(s) or panel(s) shall be centered on the test deck and extend to the edges of the test deck. The mounted modules or panels shall be tested in combination with the following roof constructions: | |
| language | English | |
| title | UL 1703 BULLETIN | num |
| title | UL Standard for Safety Flat-Plate Photovoltaic Modules and Panels - COMMENTS DUE: July 13, 2015 | en |
| type | standard | |
| page | 4 | |
| status | Active | |
| tree | UL - UL:;2015 | |
| contenttype | fulltext |