IEC 60951-4
English -- Nuclear power plants – Instrumentation important to safety – Radiation monitoring for accident and post-accident conditions – Part 4: Equipment for continuous in-line or on-line monitoring of radioactivity in process streams - Edition 2.0;
French -- Centrales nucléaires de puissance – Instrumentation importante pour la sûreté – Surveillance des rayonnements pour les conditions accidentelles et postaccidentelles – Partie 4: Equipement pour la surveillance en continu des rayonnements internes ou externes aux flux de procédé - Edition 2.0
Organization:
IEC - International Electrotechnical Commission
Year: 2009
Abstract: This part of IEC 60951 provides general guidance on the design principles and performance criteria for equipment for continuous in-line or on-line monitoring of radioactivity in process stream in nuclear power plants for accident and post-accident conditions.
General requirements for technical characteristics, test procedures, radiation characteristics, electrical, mechanical, and environmental characteristics are given in IEC 60951-1. These requirements are applicable in this part unless otherwise stated.
IEC 60951-4 is only applicable to continuous in-line or on-line measurement, i.e. monitors for which the detector measures radioactivity by being positioned in the process stream (i.e. immerged in) or adjacent to the process stream (i.e. viewing straight through a pipe or tank). It does not apply to monitors for which the detector measures a representative proportion of the stream at some remote location (sampling assembly), which are within the scope of IEC 60951-2.
IEC 60951-4 is only applicable to monitors for accident and post-accident conditions. Process stream radiation monitoring equipment for normal and incident conditions are within the scope of IEC 60768.
General requirements for technical characteristics, test procedures, radiation characteristics, electrical, mechanical, and environmental characteristics are given in IEC 60951-1. These requirements are applicable in this part unless otherwise stated.
IEC 60951-4 is only applicable to continuous in-line or on-line measurement, i.e. monitors for which the detector measures radioactivity by being positioned in the process stream (i.e. immerged in) or adjacent to the process stream (i.e. viewing straight through a pipe or tank). It does not apply to monitors for which the detector measures a representative proportion of the stream at some remote location (sampling assembly), which are within the scope of IEC 60951-2.
IEC 60951-4 is only applicable to monitors for accident and post-accident conditions. Process stream radiation monitoring equipment for normal and incident conditions are within the scope of IEC 60768.
Collections
:
Show full item record
contributor author | IEC - International Electrotechnical Commission | |
date accessioned | 2017-09-04T18:45:02Z | |
date available | 2017-09-04T18:45:02Z | |
date copyright | 2009.06.01 | |
date issued | 2009 | |
identifier other | KGGTMCAAAAAAAAAA.pdf | |
identifier uri | http://yse.yabesh.ir/std/handle/yse/226465 | |
description abstract | This part of IEC 60951 provides general guidance on the design principles and performance criteria for equipment for continuous in-line or on-line monitoring of radioactivity in process stream in nuclear power plants for accident and post-accident conditions. General requirements for technical characteristics, test procedures, radiation characteristics, electrical, mechanical, and environmental characteristics are given in IEC 60951-1. These requirements are applicable in this part unless otherwise stated. IEC 60951-4 is only applicable to continuous in-line or on-line measurement, i.e. monitors for which the detector measures radioactivity by being positioned in the process stream (i.e. immerged in) or adjacent to the process stream (i.e. viewing straight through a pipe or tank). It does not apply to monitors for which the detector measures a representative proportion of the stream at some remote location (sampling assembly), which are within the scope of IEC 60951-2. IEC 60951-4 is only applicable to monitors for accident and post-accident conditions. Process stream radiation monitoring equipment for normal and incident conditions are within the scope of IEC 60768. | |
language | English, French | |
title | IEC 60951-4 | num |
title | English -- Nuclear power plants – Instrumentation important to safety – Radiation monitoring for accident and post-accident conditions – Part 4: Equipment for continuous in-line or on-line monitoring of radioactivity in process streams - Edition 2.0 | en |
title | French -- Centrales nucléaires de puissance – Instrumentation importante pour la sûreté – Surveillance des rayonnements pour les conditions accidentelles et postaccidentelles – Partie 4: Equipement pour la surveillance en continu des rayonnements internes ou externes aux flux de procédé - Edition 2.0 | other |
type | standard | |
page | 30 | |
status | Active | |
tree | IEC - International Electrotechnical Commission:;2009 | |
contenttype | fulltext |