UL 1063 BULLETIN

UL Standard for Safety Machine-Tool Wires and Cables - COMMENTS DUE: February 6, 2012

contributor author	UL - UL
date accessioned	2017-09-04T18:46:34Z
date available	2017-09-04T18:46:34Z
date copyright	01/06/2012
date issued	2012
identifier other	KJWQTEAAAAAAAAAA.pdf
identifier uri	http://yse.yabesh.ir/std/handle/yse/227831
description abstract	These requirements cover all-thermoplastic Type MTW, 600-V, machine-tool wires and cables for use as specified in the National Electrical Code (ANSI/NFPA 70), and in the National Fire Protection Association Electrical Standard for Industrial Machinery (ANSI/NFPA 79). These wires and cables comply with a flame test and are for use at 90°C (194°F) and lower temperatures in dry locations and at 60°C (140°F) and lower temperatures where exposed to moisture, oil, or coolants such as cutting oils and the like. The two single-conductor constructions covered are described in Table 1.1. Both are PVC-insulated and one includes a nylon jacket over the insulation. The multiple-conductor constructions covered consist of assemblies of these single-conductor constructions (sizes and styles may be mixed) enclosed by a PVC jacket.
language	English
title	UL 1063 BULLETIN	num
title	UL Standard for Safety Machine-Tool Wires and Cables - COMMENTS DUE: February 6, 2012	en
type	standard
page	2
status	Active
tree	UL - UL:;2012
contenttype	fulltext