SAE AMS4314D
Aluminum Alloy Rings, Rolled or Forged 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T651, 2014-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated - UNS A92014
Organization:
SAE - SAE International
Year: 2012
Abstract: Form:
This specification covers an aluminum alloy in the form of rolled or forged rings.
Application:
These rings have been used typically to form moderately high strength structural machined parts where good stability is required during machining, but usage is not limited to such applications.
This material is not recommended for fusion welding.
Certain design and fabricating procedures may cause these products to become subject to stress-corrosion cracking; ARP 823 recommends practices to minimize such conditions.
Classification:
The rings covered by this specification are classified by type of mechanical stress relief as follows:
Type 1-Stress relieved by stretching (2014-T651)
Type 2-Stress relieved by compression (2014-T652).
Either type may be supplied, unless a specific type is ordered.
This specification covers an aluminum alloy in the form of rolled or forged rings.
Application:
These rings have been used typically to form moderately high strength structural machined parts where good stability is required during machining, but usage is not limited to such applications.
This material is not recommended for fusion welding.
Certain design and fabricating procedures may cause these products to become subject to stress-corrosion cracking; ARP 823 recommends practices to minimize such conditions.
Classification:
The rings covered by this specification are classified by type of mechanical stress relief as follows:
Type 1-Stress relieved by stretching (2014-T651)
Type 2-Stress relieved by compression (2014-T652).
Either type may be supplied, unless a specific type is ordered.
Subject: 2014-T651
Collections
:
Show full item record
contributor author | SAE - SAE International | |
date accessioned | 2017-09-04T15:30:19Z | |
date available | 2017-09-04T15:30:19Z | |
date copyright | 02/01/2005 (R 2012) | |
date issued | 2012 | |
identifier other | AWOTUEAAAAAAAAAA.pdf | |
identifier uri | http://yse.yabesh.ir/std/handle/yse/31656 | |
description abstract | Form: This specification covers an aluminum alloy in the form of rolled or forged rings. Application: These rings have been used typically to form moderately high strength structural machined parts where good stability is required during machining, but usage is not limited to such applications. This material is not recommended for fusion welding. Certain design and fabricating procedures may cause these products to become subject to stress-corrosion cracking; ARP 823 recommends practices to minimize such conditions. Classification: The rings covered by this specification are classified by type of mechanical stress relief as follows: Type 1-Stress relieved by stretching (2014-T651) Type 2-Stress relieved by compression (2014-T652). Either type may be supplied, unless a specific type is ordered. | |
language | English | |
title | SAE AMS4314D | num |
title | Aluminum Alloy Rings, Rolled or Forged 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T651, 2014-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated - UNS A92014 | en |
type | standard | |
page | 8 | |
status | Active | |
tree | SAE - SAE International:;2012 | |
contenttype | fulltext | |
subject keywords | 2014-T651 | |
subject keywords | 2014-T652 | |
subject keywords | Aluminum alloy rings | |
subject keywords | mechanical stress relief | |
subject keywords | UNS A 92014 |