• 0
    • ارسال درخواست
    • حذف همه
    • Industrial Standards
    • Defence Standards
  • درباره ما
  • درخواست موردی
  • فهرست استانداردها
    • Industrial Standards
    • Defence Standards
  • راهنما
  • Login
  • لیست خرید شما 0
    • ارسال درخواست
    • حذف همه
View Item 
  •   YSE
  • Industrial Standards
  • ASTM - ASTM International
  • View Item
  •   YSE
  • Industrial Standards
  • ASTM - ASTM International
  • View Item
  • All Fields
  • Title(or Doc Num)
  • Organization
  • Year
  • Subject
Advanced Search
JavaScript is disabled for your browser. Some features of this site may not work without it.

Archive

Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves

ASTM E1731-25

Organization:
ASTM - ASTM International
Year: 2025

Abstract: 5.1 The NVR obtained by this test method is that amount which is available for release by the gloves onto handled surfaces while cleaning surfaces with solvents. 5.2 Evaporation of solvent at the stated temperature is to quantify the NVR that can be expected to exist at room temperature, since the slight difference between room temperature and the test temperature is not likely to result in significant variances. 5.3 This method may be more aggressive than necessary to determine the suitability of cleanroom gloves that are restricted to dry operations only. 5.4 Various other methods exist for determining NVR, for example Practice G120 and IEST-RP-CC005. This test is not intended to replace test methods used for other purposes.
URI: http://yse.yabesh.ir/std/handle/yse/343907
Collections :
  • ASTM - ASTM International
  • Download PDF : (347.3Kb)
  • Show Full MetaData Hide Full MetaData
  • Statistics

    Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves

Show full item record

contributor authorASTM - ASTM International
date accessioned2025-09-30T19:29:51Z
date available2025-09-30T19:29:51Z
date copyright2025
date issued2025
identifier othere1731-25.pdf
identifier urihttp://yse.yabesh.ir/std/handle/yse/343907
description abstract5.1 The NVR obtained by this test method is that amount which is available for release by the gloves onto handled surfaces while cleaning surfaces with solvents. 5.2 Evaporation of solvent at the stated temperature is to quantify the NVR that can be expected to exist at room temperature, since the slight difference between room temperature and the test temperature is not likely to result in significant variances. 5.3 This method may be more aggressive than necessary to determine the suitability of cleanroom gloves that are restricted to dry operations only. 5.4 Various other methods exist for determining NVR, for example Practice G120 and IEST-RP-CC005. This test is not intended to replace test methods used for other purposes.
languageEnglish
titleStandard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Glovesen
titleASTM E1731-25num
typestandard
statusActive
treeASTM - ASTM International:;2025
contenttypefulltext
scope1.1 This test method covers the determination of solvent extractable nonvolatile residue (NVR) from gloves used in cleanrooms where spacecraft are assembled, cleaned, or tested. 1.2 The NVR of interest is that which can be extracted from gloves using a specified solvent that has been selected for its extracting qualities, or because it is representative of solvents used in the particular facility. Alternative solvents may be used, but since their use may result in different values being generated, they must be identified in the procedure data sheet. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
identifier DOI10.1520/E1731-25
DSpace software copyright © 2017-2020  DuraSpace
نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
yabeshDSpacePersian
 
DSpace software copyright © 2017-2020  DuraSpace
نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
yabeshDSpacePersian