ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate: Recent submissions

Now showing items 121-140 of 179

    • MIL-P-46183 (2) 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1999
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-HDBK-733 VALID NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1992
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-DTL-32333 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2009
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers wrought magnesium alloy armor plate in nominal thicknesses from 0.250 to 3.000 inch, inclusive (see 6.2).Intended Use: The armor specified herein is intended for use on vehicle and ...
      Subject(s) : 20-mm FSP , Ballistic testing , Caliber .22 FSP , Caliber .30 AP M2 , Caliber .30 FSP , Caliber .50 FSP , M1114 HMMWV , Military vehicles , Stress corrosion ,

    • MIL-P-43037 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1961
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers requirements for laminated rods of phenolic resin and nylon fabric. Intended Use: The laminated, nylon fabric base phenolic rods conforming to this specification are intended for ...

    • QPL-32405 NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2013
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-HDBK-1264 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1998
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This handbook prescribes requirements for radiographic inspection for soundness of welds in steel by comparison to selective severity levels of ASTM E390, Volume II reference radiographs. The base material varies from ...
      Subject(s) : Crater crack , Discontinuities , Porosity , Tungsten inclusions ,

    • MIL-HDBK-786 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1987
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This handbook provides a procedure for assuring the proper operation of an acoustic emission system installed on a field test article. This handbook allows the user:
      1. to insure that no degradation of performance has ...
      Subject(s) : Acoustic Emission , Field Calibration of Acoustic Emission Systems ,

    • MIL-HDBK-17-1F CANC NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2013
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-DTL-46035C 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1999
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers high strength wrought titanium alloys, in annealed or heat treated shapes, having a critical section thickness of one-quarter to two and one-half inches, for critical components other than armor, ...
      Subject(s) : Chambers , Charpy , Grade , Impurity , Nozzles , Tubes ,

    • MIL-PRF-46194A (1) 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1999
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-HDBK-728/6 VALID NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1992
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-HDBK-17-2F CANC NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2013
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-C-15074E 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1991
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers one type of corrosion preventive intended for use as a fingerprint remover and as a temporary preservative for metallic items. Intended Use: The compound covered by this specification ...
      Subject(s) : Corrosion preventive , Finger paint remover , Preservative ,

    • MIL-HDBK-735 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1993
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: The scope of this handbook is broad. Information is presented that can be used to anticipate, prevent, recognize, and control the deterioration of metals used in Army materiel. The metals considered in this handbook been ...
      Subject(s) : Aluminum and Aluminum Alloys , Beryllium , Chemical Conversion Coatings , Coatings , Inorganic , Metallic , and Organic , Cobalt and Cobalt Alloys , Copper and Copper Alloys , Corrosion Considerations , Design and Material Selection , Corrosion Prevention , Corrosion , Chemistry and Types , Dry Film Lubricants , Environments , Inhibitors , Ion Implantation , Laboratory and Field Testing , Lead and Lead Alloys , Magnesium and Magnesium Alloys , Molybdenum , Nickel and Nickel Alloys , Packaging , Powder Metallurgy , Tantalum and Tantalum Alloys , Titanium and Titanium Alloys , Tungsten and Tungsten Alloys , Uranium and Uranium Alloys , Zinc and Zinc Alloys ,

    • MIL-HDBK-731 VALID NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1992
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-PRF-46197A 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1997
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification establishes the requirements for a high strength woven glass roving impregnated with polyester resin for molding thick armored vehicle structures.
      Laminates to be of the type specified (see 6.2): ...
      Subject(s) : Advanced composites , Armor material , Polyester composites , Prepreg ,

    • MIL-STD-662F 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1997
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: The purpose of this standard is to provide general guidelines for procedures, equipment, physical conditions, and terminology for determining the ballistic resistance of metallic, nonmetallic and composite armor against ...
      Subject(s) : Projectile , Propellant , Weapons ,

    • MIL-PRF-46190A (1) 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1999
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-HDBK-17/5 VALID NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2013
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-HDBK-691B NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2013
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate