ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate: Recent submissions

Now showing items 101-120 of 179

    • MIL-DTL-13080E VALID NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2004
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-HDBK-728/4A 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1993
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This document is intended to provide information on the use of magnetic particle testing and inspection both broad and specific applications. The use of this handbook requires MIL-HDBK-728/1, on Nondestructive Testing, to ...
      Subject(s) : Magnetic particle testing , Nondestructive testing ,

    • MIL-HDBK-729 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1983
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: MIL-HDBK-729 contains technical information and data pertaining to the corrosion and corrosion protection of metals and alloys. The factors influencing corrosion, forms of corrosive attack including stress-corrosion ...

    • MIL-HDBK-732A 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1991
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: Technical principles will be discussed which must be followed in order to insure that a technically sound Acoustic Emission (AE) test is performed on a composite sample. It is relatively simple to attach an AE sensor to a ...

    • MIL-C-52023 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1958
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers process requirements for a heat-resistant ceramic coating as used on internal combustion engine exhaust pipes, mufflers, stacks and related parts, and on low carbon steel items, where protection ...

    • MIL-HDBK-17-3F CANC NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2013
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-DTL-46063H 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1998
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers 7039 wrought aluminum alloy armor plate. The nominal thickness of armor plate covered by this specification is 1/2 inch to 4 inches, inclusive (see 3.7 and 6.2). Intended ...
      Subject(s) : Ballistic limit , Ballistic testing , Chemical analysis , Mechanical properties , Obliquity , Projectile ,

    • MIL-A-46186 CANC NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2013
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-HDBK-788 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1989
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This handbook provides guidelines for selecting sensors for a particular application.
      Because applications are too numerous to treat in detail, characteristics of applications are defined and relevant sensor attributes ...

    • MIL-HDBK-729 VALID NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1989
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-W-12332A (3) 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1994
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-DTL-13823D 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1998
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers weldable steel bars, flats and special sections produced from billets to specified dimensions by rolling or forging, for armored vehicle components. Intended Use: The steel covered ...
      Subject(s) : Billets , Brinell hardness , Charpy , Combat vehicles ,

    • MIL-STD-3021 CHG 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2011
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: Purpose. The procedures covered by this standard are intended to ensure that cold spray coating operations, either manual or automated, meet prescribed requirements. This process can be used to restore dimensionally ...
      Subject(s) : Adhesion , Coating , Cohesion , Cold gas dynamic spray , High velocity powder , Impaction process , Kinetic energy metallization , Kinetic metallization , Kinetic spraying , Particles , Powder , Propelling gas , Thermal spray ,

    • MIL-HDBK-17-4A 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2002
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: Volume 4 of MIL-HDBK-17 serves as a general Reference source for technical information on metal matrix composites, including: FIGURE 1.1.1 Focus of MIL-HDBK-17 Volume ...

    • MIL-HDBK-1265 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1998
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This handbook prescribes the requirements for the classification and soundness of steel castings exclusive of weld repair. This handbook supplements detail casting specifications when specified. This handbook is for ...
      Subject(s) : Coreshift , Criticality levels , Gas holes , Misrun , Mold buckle ,

    • MIL-DTL-32412 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2012
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification establishes the requirements and verification methods for two HFC-227ea/SBCS Fire Extinguishing agents. For the purpose of simplicity, the term ‘Agent' will be used to denote the HFC-227ea/SBCS ...

    • MIL-DTL-32375 (1) 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2012
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers 7085 wrought aluminum alloy armor plate for non fusion welded applications in nominal thicknesses from 0.500 to 3.000 inch, inclusive (see 6.2). The fusion weldability of 7085 wrought aluminum ...

    • MIL-HDBK-787 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1988
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This document is intended to provide information on using ultrasound to study several types of discontinuities found in various composite materials. The fundamentals of ultrasonics are not included as this type of information ...
      Subject(s) : Composite testing , Nondestructive testing , Ultrasonic testing ,

    • MIL-DTL-46192C (1) 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2000
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-HDBK-728/6 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1985
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: INTRODUCTION
      Ultrasonic testing employs high-frequency mechanical waves to detect various material variables. These variables can be surface o r internal variables, and their locations and/or geometries can be ...