ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate: Recent submissions

Now showing items 41-60 of 179

    • MIL-HDBK-727 VALID NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1990
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MMM-A-189C VALID NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1991
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-P-55072A 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1960
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers sheets conforming to type FBM of Specification MIL-P-15035 plus the afterglow requirements specified herein. Intended Use: The laminated phenolic resin, cotton-fabric-base, plastic ...

    • MIL-PRF-14105E (1) 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2011
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers a heat-resisting, ambient dry/heat cure paint that will withstand temperatures to a maximum of 1,400 °F (760 °C). The paint is intended for use on steel surfaces exposed to high temperatures ...

    • MIL-DTL-46083D 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1998
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers extruded aluminum alloy armor shapes up to and including 2 inches in thickness (see 3.3 and 6.2).
      Material furnished under this specification should be one of the following ...
      Subject(s) : Ballistic requirements , Obliquity , Projectile , Thermal processing ,

    • MIL-DTL-53039E 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2013
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers single component, polymeric flattened, chemical agent resistant, aliphatic polyurethane coating for use as a finish coat on military tactical equipment, which includes ground, aviation and related ...

    • MIL-DTL-11414F 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2013
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers the requirements of a fast drying corrosion inhibiting, low VOC content alkyd primer for coating interior and exterior surfaces of ammunition. This enamel primer is formulated free of lead and ...

    • MIL-L-13808B VALID NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1988
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-P-55072A (1) 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1960
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-S-3039C 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1988
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers one grade of cold finished carbon steel strip in the spheroidized annealed condition. Intended Use: The cold finished carbon steel strip in the spheroidized annealed condition, ...
      Subject(s) : Ammunition , Cartridge-Clips , High-Carbon , Steel ,

    • MIL-DTL-46027K (1) 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2013
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers weldable 5083, 5456, and 5059 wrought aluminum alloy armor plate in nominal thicknesses from 0.250 to 3.000 inch, inclusive.Intended Use: The armor specified herein is intended for ...

    • MIL-PRF-32359 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2012
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers general cleaners (excludes petroleum products) that are hazardous air pollutant (HAP) free and many of which contain either a low content of volatile organic compounds (VOC) or are composed entirely ...

    • MIL-HDBK-1941 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1998
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This handbook covers the requirements for the fabrication of weldments by metal-arc welding processes, which weldments are constructed of homogeneous rolled and cast armor and the steel attachments to this armor. This ...
      Subject(s) : Ballistic testing , Electrodes , Joints , Magnetic particles , Radiographs ,

    • MIL-PRF-22750G 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2011
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers the requirements for a two component, high solids epoxy coating. This coating is free of all inorganic hazardous air pollutants (HAPS), including compounds of lead and chromium. The coating is ...
      Subject(s) : Aircraft , Army , Color , Equipment , Kit , Navy , Pigment , Topcoat ,

    • FED-STD-141D 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2001
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This standard elaborates the methods used to determine the physical and chemical properties of paint, varnish, lacquer, and related materials. The purpose of this standard is to establish standardized testing methodologies ...

    • MIL-DTL-11195H 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2011
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers a fast drying, lusterless, low volatile organic compound (VOC) content alkyd enamel for use on exterior and interior metal surfaces. This enamel is formulated free of lead and chromate (hexavalent ...
      Subject(s) : Alkyd , Chromate , Color , Lead , Pigment ,

    • MIL-HDBK-787 VALID NOTICE 1 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1993
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate

    • MIL-PRF-46103E 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;1998
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers the performance requirements for lightweight composite armor (see 6.1).
      The composite armor should be classified into these types and classes according to its ballistic protection limit ...
      Subject(s) : Ballistic deformation , Muzzle velocity , Projectile , Spall cover , V , Witness plate ,

    • MIL-DTL-53084B 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2011
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers waterborne, cathodic epoxy electrodeposition primer formulated free of lead, hexavalent chromium and hazardous air pollutants (HAPs). The primer meets solvent emission maximums of 144 grams/liter ...
      Subject(s) : Aluminum , CARC , Component , Composition , Paste , Pigment , Resin , Steel , Total solids ,

    • MIL-DTL-53030D 

      Type: standard
      Source: ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate:;2011
      Organization : ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate
      Abstract: This specification covers the requirements for a water based, air-drying, corrosioninhibiting, epoxy type primer for pretreated ferrous and nonferrous metals. The primer is lead and chromate free and is compatible with ...
      Subject(s) : Aluminum , Camouflage system , HAP-free , Metals , Panels , Steel , VOC ,