ARMY - MR - Army Research Laboratory, Weapons and Materials Research Directorate: Recent submissions
Now showing items 61-80 of 179
-
MIL-T-52089
-
MMM-A-181D
Abstract: This specification covers general-purpose, 2-part adhesives, or optionally a 1-part adhesive for type III (see 3.1.1), for wood assembly gluing. The adhesives are for the manufacture of laminated members and other ... -
MIL-S-645C
Abstract: This specification covers one composition of drawing quality, special killed cold rolled carbon steel strip for the manufacture of small arms ammunition cartridge cases and ammunition components. Intended Use: ...Subject(s) : Austenite grain size , Carbon Steel , Cartridge Cases , Cold rolled , Killed steel , Spheroidized anneal , Strip , -
MIL-DTL-32262
Abstract: This specification covers unweldable 6061 wrought aluminum alloy armor plate in nominal thicknesses from 0.250 to 3.000 inch, inclusive (see 6.2). The weldability of 6061 wrought aluminum alloy armor has not been determined. ... -
A-A-272B VALID NOTICE 1
Abstract: This Commercial Item Description covers three types of 1-part caulking compounds suitable for use as recommended by the manufacturers for sealing, caulking, filling, leveling and glazing in general exterior architectural ... -
MIL-HDBK-733
Abstract: This document is intended to provide information on radiographic techniques for examining discontinuities found in many types of reinforced composites. The handbook contains varied information from the detection of ...Subject(s) : Composite Materials Testing , Nondestructive Testing , Radiography , Radiography of Composite Materials , -
MIL-HDBK-693A
Abstract: Preface
This is one of a group of pamphlets covering the metallic and nonmetallic materials used in the design and construction of military equipment, which as a group constitute the Materials Handbook. ... -
MMM-A-181D VALID NOTICE 1
Abstract: NOTICE OF VALIDATION
MMM-A-181D, dated 23 January 1980, has been reviewed and determined to be valid for use in acquisition. -
MIL-DTL-46100E (1)
Abstract: This specification covers quenched and tempered high-hardness wrought steel armor plate for lightweight armor applications for ordered thicknesses from 0.118 inches (3 mm) up to an ordered thickness of 2.000 inches (50.8 ...Subject(s) : Heat treated plates , -
MIL-P-52160
Abstract: This specification covers two types of plywood of a premium quality for use as instrument mounting boards on guided missiles (see 6.2). -
MIL-S-13040
Abstract: This specification covers special quality steel bars and round seamless steel tubes for use in the manufacture of piston rods and cylinders for hydro-pneumatic recoil mechanisms and equilibrators. -
MIL-PRF-46108C
Abstract: This specification covers the performance requirements for transparent armor used in armored military vehicles and aircraft. Transparent armor is the technical term for protective transparencies commonly called ballistic ...Subject(s) : Ballistic limit , Birefringence , Glass , Limousines , Windows , -
MIL-HDBK-212