MIL-A-159D

ANTIMONY SULFIDE (FOR USE IN AMMUNITION)

contributor author	ARMY - AR - US Army Research Devlp & Engr Command, Armament Research Devlp & Engr Center
date accessioned	2017-09-04T16:11:42Z
date available	2017-09-04T16:11:42Z
date copyright	05/16/1972
date issued	1972
identifier other	SMTHDAAAAAAAAAAA.pdf
identifier uri	http://yse.yabesh.ir/std/handle/yse/74894
description abstract	This specification covers two types and five classes of antimony sulfide. Antimony sulfide shall be of the following types and classes, as specified (see 6.2). Types Type I - 0.2 percent free sulfur, maximum Type II - 0.02 percent free sulfur, maximum Classes Class 1 - 100 mesh, nominal Class 2 - Fine Class 3 - 100 mesh, nominal, coarse Class 4 - Lump Class 5 - 140 mesh, nominal Intended Use: Type I is intended for use in the usual priming compositions and also matchhead compositions. Type II is intended for use in Tacot priming compositions. Classes 1, 2, 3, and 5 are intended for use in priming compositions. Class 4 is intended for use in matchhead compositions.
language	English
title	MIL-A-159D	num
title	ANTIMONY SULFIDE (FOR USE IN AMMUNITION)	en
type	standard
page	17
status	Active
tree	ARMY - AR - US Army Research Devlp & Engr Command, Armament Research Devlp & Engr Center:;1972
contenttype	fulltext