درباره ما
MIL-A-159D
ANTIMONY SULFIDE (FOR USE IN AMMUNITION)
Year: 1972
Abstract: This specification covers two types and five classes of antimony sulfide.
Antimony sulfide shall be of the following types and classes, as specified (see 6.2).
Intended Use: Type I is intended for use in the usual priming compositions and also matchhead compositions. Type II is intended for use in Tacot priming compositions. Classes 1, 2, 3, and 5 are intended for use in priming compositions. Class 4 is intended for use in matchhead compositions.
Antimony sulfide shall be of the following types and classes, as specified (see 6.2).
Types Type I - 0.2 percent free sulfur, maximum Type II - 0.02 percent free sulfur, maximum Classes Class 1 - 100 mesh, nominal Class 2 - Fine Class 3 - 100 mesh, nominal, coarse Class 4 - Lump Class 5 - 140 mesh, nominal
Intended Use: Type I is intended for use in the usual priming compositions and also matchhead compositions. Type II is intended for use in Tacot priming compositions. Classes 1, 2, 3, and 5 are intended for use in priming compositions. Class 4 is intended for use in matchhead compositions.
Show full item record
| contributor author | ARMY - AR - US Army Research Devlp & Engr Command, Armament Research Devlp & Engr Center | |
| date accessioned | 2017-09-04T16:11:42Z | |
| date available | 2017-09-04T16:11:42Z | |
| date copyright | 05/16/1972 | |
| date issued | 1972 | |
| identifier other | SMTHDAAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std/handle/yse/74894 | |
| description abstract | This specification covers two types and five classes of antimony sulfide. Antimony sulfide shall be of the following types and classes, as specified (see 6.2). Types Type I - 0.2 percent free sulfur, maximum Type II - 0.02 percent free sulfur, maximum Classes Class 1 - 100 mesh, nominal Class 2 - Fine Class 3 - 100 mesh, nominal, coarse Class 4 - Lump Class 5 - 140 mesh, nominal Intended Use: Type I is intended for use in the usual priming compositions and also matchhead compositions. Type II is intended for use in Tacot priming compositions. Classes 1, 2, 3, and 5 are intended for use in priming compositions. Class 4 is intended for use in matchhead compositions. | |
| language | English | |
| title | MIL-A-159D | num |
| title | ANTIMONY SULFIDE (FOR USE IN AMMUNITION) | en |
| type | standard | |
| page | 17 | |
| status | Active | |
| tree | ARMY - AR - US Army Research Devlp & Engr Command, Armament Research Devlp & Engr Center:;1972 | |
| contenttype | fulltext |