A-A-51127A

DLA - GS - DLA Aviation - Richmond

HOLDER, KNURLING TOOL, LATHE

Organization:

Year: 1990

Abstract: This description covers tool holders that are designed to hold and support knurling tools that are used on bench and engine lathes.
Tool holders shall be of the following types and sizes. The type and size to be furnished shall be as specified (see 6.1).

     Type I    - Holder, knurling tool, single, lathe.      Size      - Sizes shall be selected from table I.       Type II   - Holder, knurling tool, multiple, lathe.      Size      - Sizes shall be selected from table II.

TABLE I. Type I - Single knurling tool holder.

Knurl dimensions           Tool       Thickness     Height     Length of      Outside   Thickness      Hole holder     of shank;     of shank;  Shank;         diameter  of knurl;      diameter size       inches        inches      -in.          inches    inches         inches     4       5/16          ¾        2-15/16        ⅝       5/16           7/32   10       ⅜           ⅞        3-¼          ⅝       5/16           7/32   11       ½           1-⅛      3-¾          ¾       ⅜            ¼   12       ⅝           1-⅜      5              ¾       ⅜            ¼   13       ⅞           1-¾      5-¾          1         ⅜            5/16

TABLE II. Type II - Multiple knurling tool holder.

Length of           Knurl dimensions        Tool       Thickness     Height     shank;      Outside    Thickness    Hole holder     of shank;     of shank;  inches,     diameter;  of knurl;    diameter; size       inches        inches     min.        inches     inches       inches -------------------------------------------------------------------------------------   20         ⅜           ⅞      2-½             ⅝     5/16         7/32   21         ½         1-⅛      3-⅛             ¾     ⅜          ¼   22         ⅝         1-⅜      3-⅛             ¾     ⅜          ¼

URI: http://yse.yabesh.ir/std/handle/yse/74951

Collections :

DLA - GS - DLA Aviation - Richmond

Show full item record

contributor author	DLA - GS - DLA Aviation - Richmond
date accessioned	2017-09-04T16:11:44Z
date available	2017-09-04T16:11:44Z
date copyright	01/12/1990
date issued	1990
identifier other	SMWUDAAAAAAAAAAA.pdf
identifier uri	http://yse.yabesh.ir/std/handle/yse/74951
description abstract	This description covers tool holders that are designed to hold and support knurling tools that are used on bench and engine lathes. Tool holders shall be of the following types and sizes. The type and size to be furnished shall be as specified (see 6.1). Type I - Holder, knurling tool, single, lathe. Size - Sizes shall be selected from table I. Type II - Holder, knurling tool, multiple, lathe. Size - Sizes shall be selected from table II. TABLE I. Type I - Single knurling tool holder. Knurl dimensions Tool Thickness Height Length of Outside Thickness Hole holder of shank; of shank; Shank; diameter of knurl; diameter size inches inches -in. inches inches inches 4 5/16 ¾ 2-15/16 ⅝ 5/16 7/32 10 ⅜ ⅞ 3-¼ ⅝ 5/16 7/32 11 ½ 1-⅛ 3-¾ ¾ ⅜ ¼ 12 ⅝ 1-⅜ 5 ¾ ⅜ ¼ 13 ⅞ 1-¾ 5-¾ 1 ⅜ 5/16 TABLE II. Type II - Multiple knurling tool holder. Length of Knurl dimensions Tool Thickness Height shank; Outside Thickness Hole holder of shank; of shank; inches, diameter; of knurl; diameter; size inches inches min. inches inches inches ------------------------------------------------------------------------------------- 20 ⅜ ⅞ 2-½ ⅝ 5/16 7/32 21 ½ 1-⅛ 3-⅛ ¾ ⅜ ¼ 22 ⅝ 1-⅜ 3-⅛ ¾ ⅜ ¼
language	English
title	A-A-51127A	num
title	HOLDER, KNURLING TOOL, LATHE	en
type	standard
page	8
status	Active
tree	DLA - GS - DLA Aviation - Richmond:;1990
contenttype	fulltext