درباره ما
MIL-DTL-43719D
MARKING MATERIALS AND MARKERS, ADHESIVE, ELASTOMERIC, PIGMENTED; GENERAL SPECIFICATION FOR
Year: 2009
Abstract: This specification covers the general requirements for adhesive-backed, pigmented, elastomeric marking materials (see 6.1) in roll and sheet form. Requirements for individual markers, (i.e., letters, numerals, legends, symbols, and hazardous material symbols) are covered by the specification sheets.Intended Use: Class 1 marking material is used in the manufacture of markers that are permanent in nature. The markers are then to be applied, by means of their adhesive layer, on exterior and interior surfaces of automotive vehicles, aerospace and ground support equipment, on interior surfaces of aircraft, and in other applications as required or permitted. Class 2 marking material is intended for use in preparation of temporary identification and instruction markers in shipment and storage of supplies and equipment as provided in MIL-STD-129. An important characteristic of class 2 material; e.g., in marking of vehicles during shipment and storage, is that it is readily removable even after extended weathering. These materials are not intended to be used on surfaces which become heated above 150° F. For exterior markers of the United State Air Force aircraft, the applicable material is covered by A-A-59485.
Subject: Vehicle marking
Show full item record
| contributor author | DLA - IS - DLA Troop Support - Industrial Hardware Items of Supply Standardization Code | |
| date accessioned | 2017-09-04T16:19:15Z | |
| date available | 2017-09-04T16:19:15Z | |
| date copyright | 04/06/2009 | |
| date issued | 2009 | |
| identifier other | THOQLCAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std/handle/yse/82685 | |
| description abstract | This specification covers the general requirements for adhesive-backed, pigmented, elastomeric marking materials (see 6.1) in roll and sheet form. Requirements for individual markers, (i.e., letters, numerals, legends, symbols, and hazardous material symbols) are covered by the specification sheets.Intended Use: Class 1 marking material is used in the manufacture of markers that are permanent in nature. The markers are then to be applied, by means of their adhesive layer, on exterior and interior surfaces of automotive vehicles, aerospace and ground support equipment, on interior surfaces of aircraft, and in other applications as required or permitted. Class 2 marking material is intended for use in preparation of temporary identification and instruction markers in shipment and storage of supplies and equipment as provided in MIL-STD-129. An important characteristic of class 2 material; e.g., in marking of vehicles during shipment and storage, is that it is readily removable even after extended weathering. These materials are not intended to be used on surfaces which become heated above 150° F. For exterior markers of the United State Air Force aircraft, the applicable material is covered by A-A-59485. | |
| language | English | |
| title | MIL-DTL-43719D | num |
| title | MARKING MATERIALS AND MARKERS, ADHESIVE, ELASTOMERIC, PIGMENTED; GENERAL SPECIFICATION FOR | en |
| type | standard | |
| page | 17 | |
| status | Active | |
| tree | DLA - IS - DLA Troop Support - Industrial Hardware Items of Supply Standardization Code:;2009 | |
| contenttype | fulltext | |
| subject keywords | Vehicle marking |