KSC - NASA - KSC - Kennedy Space Center: Recent submissions

Now showing items 21-40 of 94

    • KSC-SPEC-Z-0019 REV E 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;2000
      Organization : KSC - NASA - KSC - Kennedy Space Center

    • KSC-NE-9187 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;2008
      Organization : KSC - NASA - KSC - Kennedy Space Center
      Abstract: This document's scope is limited to measurements being utilized at KSC in ground support equipment. This set of guidelines has been developed by the NASA KSC Instrumentation Branch of the Engineering Directorate. It is ...

    • KSC-SPEC-E-0029 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;1972
      Organization : KSC - NASA - KSC - Kennedy Space Center

    • KSC-SPEC-F-0009 REV A 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;1988
      Organization : KSC - NASA - KSC - Kennedy Space Center

    • KSC-E-166 REV C W/CHG 1 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;2013
      Organization : KSC - NASA - KSC - Kennedy Space Center
      Abstract: This specification covers the general workmanship requirements and procedures for the complete installation and assembly of electrical ground support equipment (EGSE) such as terminal distributors, junction boxes, conduit ...

    • KSC-STD-E-0006 REV B 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;1993
      Organization : KSC - NASA - KSC - Kennedy Space Center
      Abstract: This standard identifies the cable types that shall be used at the John F. Kennedy Space Center (KSC) for instrumentation and communications applications. The cable types listed herein shall be used for all new installations ...

    • KSC-SPEC-F-0006 REV B 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;2009
      Organization : KSC - NASA - KSC - Kennedy Space Center

    • KSC-SPEC-P-0020 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;2001
      Organization : KSC - NASA - KSC - Kennedy Space Center
      Abstract: This specification establishes the requirements for hydrochlorofluorocarbon-(HCFC)-225, the mixture of 3,3-dichloro-1,1,1,2,2-pentafluoropropane, HCFC-225 ca isomer, (45±5 wt%) and 1,3-dichloro-1,1,2,2,3-pentafluoropropane, ...

    • KSC-C-123 REV J 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;2009
      Organization : KSC - NASA - KSC - Kennedy Space Center
      Abstract: This specification establishes surface cleanliness levels, processing, handling, cleaning, test methods, packaging, protection, and inspection procedures for determining surface cleanliness for critical surfaces of ground ...

    • KSC-SPEC-P-0025 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;2002
      Organization : KSC - NASA - KSC - Kennedy Space Center
      Abstract: This specification establishes the requirements for propylene glycol monomethyl ether (PGME), 1-methoxy-2-propanol. Intended Use: The material described in this specification is intended to be used in the ...

    • KSC-GP-364 REV 35 W/CHG 2 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;2013
      Organization : KSC - NASA - KSC - Kennedy Space Center

    • KSC-STD-Z-0012 REV B 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;1990
      Organization : KSC - NASA - KSC - Kennedy Space Center

    • KSC-GP-425 REV G W/AMD 3 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;1997
      Organization : KSC - NASA - KSC - Kennedy Space Center
      Abstract: This document is a compilation of standard fluid fitting parts and design standards used in the design of hydraulic and pneumatic systems used at the John F.Kennedy Space Center, Florida.
      PURPOSE
      The purpose of ...

    • KSC-STD-132 REV D 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;2008
      Organization : KSC - NASA - KSC - Kennedy Space Center
      Abstract: The purpose of this document is to establish a standard process for potting and molding electrical cable assembly terminations using epoxy-resin potting compositions and elastomeric dielectric compounds.
      This standard ...

    • KSC-W-167 REV B 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;1994
      Organization : KSC - NASA - KSC - Kennedy Space Center

    • KSC-SPEC-P-0014 REV A 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;1992
      Organization : KSC - NASA - KSC - Kennedy Space Center

    • KSC-STD-6 REV D 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;1995
      Organization : KSC - NASA - KSC - Kennedy Space Center

    • KSC-STD-E-0011 REV H 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;2009
      Organization : KSC - NASA - KSC - Kennedy Space Center
      Abstract: This standard is to be used by the John F. Kennedy Space Center (KSC) design and maintenance organizations for internal operations and as a technical document to specify requirements in KSC design contracts. This standard ...

    • KSC-STD-152-2 REV C 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;1992
      Organization : KSC - NASA - KSC - Kennedy Space Center
      Abstract: This standard establishes the requirements applicable to the graphic symbols used on ground support equipment (GSE) drawings prepared by or for the John F. Kennedy Space Center (KSC), NASA. This standard applies to those ...

    • KSC-SPEC-P-0017 

      Type: standard
      Source: KSC - NASA - KSC - Kennedy Space Center:;1994
      Organization : KSC - NASA - KSC - Kennedy Space Center