درباره ما
KSC - NASA - KSC - Kennedy Space Center: Recent submissions
Now showing items 41-60 of 94
-
KSC-SPEC-P-0022
Abstract: This specification establishes the requirements for hydrochlorofluorocarbon-(HCFC)-225G, 1,3-dichloro-1,1,2,2,3-pentafluoropropane, HCFC-225 cb isomer. Intended Use: The solvent described in this specification ... -
KSC-SPEC-F-0006 REV B
Abstract: This specification is mandatory for use by KSC and associated contractors. This specification covers general requirements for heat and blast protection coating materials for launch structures and ground support equipment ... -
KSC-STD-141 REV A
Abstract: This standard establishes requirements for load test identification, identification data, and the method for affixing load test data to lifting devices or other ground support equipment. This standard is applicable to all ... -
KSC-GP-435 VOL II REV B
Abstract: This manual establishes the requirements, procedures, and practices for the preparation, release, revision, modification, maintenance, and control of engineering drawings prepared for or by the John F. Kennedy Space Center ... -
KSC-E-165 REV E CHG 1
Abstract: This document specifies parts, materials, and processes used in the fabrication, maintenance, repair, and procurement of electrical and electronic control and monitoring equipment associated with ground support equipment ... -
KSC-DE-512-SM REV L CHG 1
Abstract: Purpose
KSC-DE-512-SM establishes requirements and guidance for design and fabrication of ground systems (GS) that includes: ground support equipment (GSE), ground support systems (GSS), and facility ... -
KSC-STD-152-1 REV C
Abstract: This standard establishes the requirements applicable to the graphic symbols to be used on conventional and nonconventional facilities drawings prepared by or for the John F. Kennedy Space Center (KSC), NASA. This standard ... -
KSC-STD-E-0021
Abstract: Design Guidance. This standard provides design guidance to premises distribution designers and facility contractors in the design, bid/proposal cycle and implementation phases of a Premises Distribution System (PDS). ... -
KSC-SPEC-Z-0007 REV E
Abstract: This specification defines the requirements for pressure tubing suitable for use with standard, 37-degree, flared tube fittings and buttwelding tube fittings in ground support equipment fluid systems at the John F. Kennedy ... -
KSC-SPEC-Z-0009 REV A
Abstract: This specification defines the requirements for lubrication of stainless steel and aluminum 37-degree flared-tube fittings to prevent galling and to provide more accurate assembly torque values.
Application. ... -
KSC-F-124 REV E
Abstract: This specification establishes the requirements for flared tube fittings and fitting accessories and fluid connections, including adjustable and swivel elbows, reducers, and tees (hereinafter referred to as fittings) ... -
KSC-GP-864 VOL IIA REV B W/CHG 1
Abstract: Various NASA programs at KSC make maximum use of existing ground systems (GS). Consequently, the designer must determine whether existing cables can be used as is or be modified, or if new cables are required.
This ... -
KSC-STD-E-0002 REV E
Abstract: PURPOSE AND SCOPE
This standard sets forth requirements for hazardproofing electrical installations and equipment located in hazardous (classified) and other locations designated as hazardous by the ... -
KSC-STD-E-0012 REV F
Abstract: This standard establishes design standards for grounding. bonding. shielding and lightning protection for all classes of systems and facilities at the John F. Kennedy Space Center (KSC). This standard shall be invoked by ...