درباره ما
AWWA - American Water Works Association: Recent submissions
Now showing items 241-260 of 296
-
PVC Pipe—Design and Installation - Third Edition
Abstract: In no event shall AWWA’s liability exceed the amount paid for the purchase of this book. Summary: “This manual provides the user with both general and technical information to aid in design, procurement, installation, and ... -
Disinfection of Water-Storage Facilities
Abstract: This standard for disinfection of water-storage facilities describes materials, facility preparation, application of disinfectant to interior surfaces of facilities, and sampling and testing for the presence of coliform ... -
Cold-Water Meters - Singlejet Type
Abstract: This standard describes the various types and classes of cold-water singlejet meters in sizes 5/8 in. (15 mm) through 6 in. (150 mm) for water utilities’ customer service and the materials and workmanship employed in their ... -
Inland Desalination and Concentrate Management - First edition
Abstract: This manual presents the key issues and challenges of developing inland desalination facilities, including concentrate management and disposal methods. The manual aims to aid water utilities, industrial facilities, and ... -
Condition Assessment of Water Mains - First edition
Abstract: Water main condition assessment currently ranks among the most important subjects to water utilities, and interest in this subject is rapidly growing. As the average age of their infrastructures increases, utilities are ... -
Fabricated-Steel and Stainless-Steel Tapping Sleeves
Abstract: This standard describes fabricated steel and stainless-steel tapping sleeves used to provide outlets and branches on existing pipe with or without interruption of service. They are intended for pipe sizes 4 in. (100 mm) ... -
Drought Preparedness and Response - Second Edition
Abstract: he world’s supply of drinkable fresh water is under increasing pressure. The United Nations (UN) estimates that water scarcity affects more than 40 percent of the global population and is projected to rise due to effects ... -
Stainless-Steel Pipe Flange Joints for Water Service—Sizes 2 In.Through 72 In. (50 mm Through 1,800 mm)
Abstract: The purpose of this standard is to provide minimum material requirements and dimensions for a variety of stainless-steel flanges for attachment to stainlesssteel piping systems. Flanges covered in this standard are intended ... -
Pipe Bursting of Potable Water Mains 4 In. (100 mm) to 36 In. (900 mm) - First Edition
Abstract: This standard describes the materials and procedures for rehabilitation of existing potable water pipelines 4 in. (100 mm) to 36 in. (900 mm) in diameter using pipe bursting. Potable water pipeline materials that can be ... -
Quicklime and Hydrated Lime
Abstract: The purpose of this standard is to provide the minimum requirements for quicklime and hydrated lime, including physical, chemical, sampling, packaging, shipping, and testing requirements. This standard can be referenced ... -
Elastomers for Waterworks: Pipes, Valves, and Fittings - First Edition
Abstract: The purpose of this manual is to explain the generic elastomer types, including their properties, characteristics, and compatibilities with waterworks systems, to assist in the selection of and application in waterworks ... -
Metal-Seated Gate Valves for Water Supply Service
Abstract: This standard describes iron-body, metal-to-metal seated, nonrisingstem (NRS) gate valves, including tapping gate valves, 3 in. (75 mm) through 72 in. (1,800 mm), and outside screw and yoke (OS&Y) rising-stem gate valves, ... -
Matched-Die-Molded, Fiberglass-Reinforced Plastic Weir Plates, Scum Baffles, and Mounting Brackets
Abstract: This standard describes the minimum requirements for fiberglass-reinforced plastic weir plates, scum baffles, mounting brackets, lap plates, cover washers, and weir pans, fabricated with the matched-die molding process. Included ... -
Contact-Molded, Fiberglass- Reinforced Plastic Wash-Water Troughs and Launders
Abstract: This standard describes the minimum requirements for fiberglass-reinforced plastic wash-water troughs and launders made by the contact-molding process, including flat-bottom, round-bottom, and V-bottom troughs and ... -
Microfiltration and Ultrafiltration Membrane Systems
Abstract: This standard sets minimum requirements for microfiltration (MF) and ultrafiltration (UF) membrane systems for water and reclaimed water filtration systems. This standard does not cover the membranes used in biological ... -
Thermosetting FiberglassReinforced Plastic Tanks
Abstract: This standard describes the composition, performance requirements, construction practices and workmanship, design, and methods of testing thermosetting fiberglass-reinforced plastic (FRP) tanks for the storage of water or ... -
Fluorosilicic Acid
Abstract: This standard describes fluorosilicic acid (H2SiF6) for use in the treatment of potable water. This standard can be referenced in documents for purchasing and receiving fluorosilicic acid and can be used as a guide for ... -
Spray-In-Place Polymeric Lining for Potable Water Pipelines 4 In. (100 mm) and Larger
Abstract: This standard describes the requirements for materials, equipment, certification, and procedures for the field application of spray-in-place polymeric (SIPP) linings to the interior of existing potable water pipelines. The ... -
Ductile-Iron Compact Fittings
Abstract: This standard describes 3-in. through 64-in. (80-mm through 1,600-mm)* ductile-iron compact fittings to be used with ductile-iron pipe or pipe made of other materials with similar outside diameters for conveying potable ... -
Cold-Water Meters for Residential Fire Sprinkler Systems in One- and TwoFamily Dwellings and Manufactured Homes
Abstract: This standard describes cold-water meters used for residential fire sprinkler applications that meet the requirements of NFPA* 13D in one- and two-family dwellings and manufactured homes, in sizes ¾ in. (20 mm) through 2 ...