درباره ما
TAPPI TIP 0502-14
Forming section monitoring
| contributor author | TAPPI - TAPPI | |
| date accessioned | 2017-09-04T18:45:50Z | |
| date available | 2017-09-04T18:45:50Z | |
| date copyright | 2010.01.01 | |
| date issued | 2010 | |
| identifier other | KIBYHDAAAAAAAAAA.pdf | |
| identifier uri | http://yse.yabesh.ir/std;jsessionid=47037D83FCDCAC426159DD6E273C9FCD/handle/yse/227172 | |
| description abstract | Instrumentation to measure, monitor, and troubleshoot the wet end of the paper machine is widely used to increase the knowledge of the papermaker. The objective of this technical publication is to provide the industry with a short description of the key parameter to be measured, its importance to the papermaker, and a listing of known commercial instruments used for these measurements. It should be noted that many of these instruments and methods have been developed or modified for the paper machine and that considerable practice and skill may be required to get reliable results. Parameters discussed include: 1. Forming fabric thickness 2. Forming fabric air permeability 3. Forming fabric tension 4. Roll abrasiveness to a fabric 5. Foil angle and foil pitch 6. Surface finish of machine components 7. Surface speed of rolls or fabrics 8. Roll diameters 9. Sheet temperature 10. Motion Analysis 11. Wet end drainage 12. Sheet formation 13. Wet end dragload 14. Headbox jet velocity | |
| language | English | |
| title | TAPPI TIP 0502-14 | num |
| title | Forming section monitoring | en |
| type | standard | |
| page | 13 | |
| status | Active | |
| tree | TAPPI - TAPPI:;2010 | |
| contenttype | fulltext | |
| subject keywords | Forming | |
| subject keywords | Forming fabrics | |
| subject keywords | Instruments | |
| subject keywords | Monitors | |
| subject keywords | Testing | |
| subject keywords | Troubleshooting | |
| subject keywords | Wet ends |
